Select a region
International Americas Sub-Saharan Africa Global Overview
Select a language
English Español
Water-Jet B 3015 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest
Totally enclosed moving units to protect against ingress of water and dust

Totally enclosed moving units to protect against ingress of water and dust

Cutter head and abrasives system are optimally adapted for the high-pressure systemBFT high-pressure pump with ALLFI cutter head and abrasives system (shown)KMT high-pressure pump with ACTIVE IDEII/PRO and KMT FEEDLINE

Cutter head and abrasives system are optimally adapted for the high-pressure systemBFT high-pressure pump with ALLFI cutter head and abrasives system (shown)KMT high-pressure pump with ACTIVE IDEII/PRO and KMT FEEDLINE

Water-Jet B 3015 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest
Totally enclosed moving units to protect against ingress of water and dust
Cutter head and abrasives system are optimally adapted for the high-pressure systemBFT high-pressure pump with ALLFI cutter head and abrasives system (shown)KMT high-pressure pump with ACTIVE IDEII/PRO and KMT FEEDLINE

Water-Jet B 3015

SKU : 166741

The machines of the Water-Jet B series cover a wide range of cutting areas. The cutting systems are designed in a portal design with a gantry drive. Depending on requirements and application, Water-Jet systems can be offered with additional equipment options. The modern control from Beckhoff with Panasonic drives and the CAM software Contranest is easy to operate and together with the economical pressure intensifier pump from the renowned manufacturer BFT, opens up new perspectives in terms of performance and price.

  • Dual-drive machine bridge
  • High-quality linear guides on all axes
  • Stand-alone cutting table with high load capacity
  • BECKHOFF CX5130 control
  • ControNest CAM-software
Working Area
Table load capacity 307 lbs/ft²
Travels
Travel Z-axis 8 in
Cutting length / Travel Y-axis 61 in
Cutting width / Travel X-axis 120 in
Rapid Feed
Rapid feed X-, Y-, Z- axis 787 in/min
Feed
Work feed 0 in/min - 787 in/min
Accuracies
Positioning accuracies ± 0.0024 in
Repeatability ± 0,002 in
Measures and Weights
Overall dimensions (length x width x height) 176 in x 99 in x 95 in
Weight without water 7.414 lbs

  • Very rigid dual-drive machine bridge
  • Rigid frame construction (sides are made of stress-free annealed and milled monoblocks, which are fastened with pins during machine setup)
  • High-quality linear guides on all axes
  • Ground and hardened helical gears on Y- and X- axes, plus high-quality preloaded ball screws on Z- axis
  • Servo-motor drive on X- / Y- / Z- axis
  • Electronically monitored central lubrication system
  • Stand-alone cutting table with high load capacity
  • Exchangeable support grid with galvanized (standard) or stainless steel (option) slats
  • The standard laser pointer simplifies workpiece alignment on the support table for optimized sheet metal utilization
  • The abrasive sand is held in a 551 lbs storage container and transferred automatically via air pressure to a dosing unit

Control BECKHOFF CX5130

  • The CX5130 has an Intel Atom® multicore processor with 1.75 GHz, real multi-core technology in the segment of compact embedded PCs
  • Two independent, Gigabit-capable Ethernet interfaces as well as four USB 2.0 and one DVI-I interfaces are available
  • The CX5130 is characterized by low power consumption and no fan
  • Powerful Contronest drives round out the powerful and reliable control package

ControNest CAM-Software

  • Easy to operate CAM software
  • ControNest was specially developed for cutting machines
  • The software includes an embedded CAM module, with which CAD drawings, nesting and material databases can be imported, which means no expensive additional CAM software is required

separate cutting table
support grid with galvanized slats
CONTRONEST CNC Control
laser pointer
abrasive tank 551 lbs
swiveling control panel attached to the machine
electronic hand-wheel
operating manual and programming instructions

BFT Ecotron 40.37 High Pressure Pump
  • Maximum power and reliability for pure-water and abrasive cutting operations
  • Maximum operator safety and low maintenance
  • Operating pressure with infinitely variable adjustment from 50 to 400 MPa
  • Hydraulic drive with axial-piston pump
  • Oil/air cooler or optional oil/water cooler
  • Pressure booster with exceptional lifetime and large pulsation damper
  • Pressure booster, complete with high-pressure tubing
  • Pulsation damper with pressure accumulator
  • Relief valve integrated in the high-pressure circuit
BFT Ecotron 40.37 High Pressure Pump SKU: 253564
BFT Ecotron 40.37 High Pressure Pump
  • Maximum power and reliability for pure-water and abrasive cutting operations
  • Maximum operator safety and low maintenance
  • Operating pressure with infinitely variable adjustment from 50 to 400 MPa
  • Hydraulic drive with axial-piston pump
  • Oil/air cooler or optional oil/water cooler
  • Pressure booster with exceptional lifetime and large pulsation damper
  • Pressure booster, complete with high-pressure tubing
  • Pulsation damper with pressure accumulator
  • Relief valve integrated in the high-pressure circuit
BFT High pressure pump Servotron 40.37 SKU: 253364
BFT High pressure pump Servotron 40.37
  • High-dynamic variable frequency drive - more than 24% energy savings – plus TÜV certification
  • Reduced operating temperature in the drive’s hydraulic oil circuit
  • Requires less cooling, extends the life of hydraulic components
  • Infinitely variable pressure from 1,450 to 58,000 psi for a wider spectrum of applications
  • Virtually no pulsation during connection, and no cracking in brittle materials - starting at 10 MPa
  • Minimal pressure fluctuations of only ± 1% at full load - increased life of high-pressure components and improved cut quality
  • No overshoots and minimum pressure dips when turning the water-jet ON or OFF - ensures less wear on the entire high-pressure system including the cutter head
  • Due to the servo-drive, no electrical power is used when the nozzle is closed - reduced power consumption and increased energy efficiency
Starter set BFT 40.30/40.37 SKU: 166213
Starter set BFT 40.30/40.37
  • Set of consumables for cutter head
  • Set of consumables for high-pressure system
  • Extended BFT Custom Tool Set for pump maintenance
  • 11 x 55 lbs abrasive sand
  • Set of torque wrenches
KMT Streamline SL VI, High pressure pump 3800 bar, 50HP SKU: 253565
KMT Streamline SL VI, High pressure pump 3800 bar, 50HP

KMT Waterjet STREAMLINE SL-VI systems feature the latest technologies and a highly intelligent design to ensure simplified use, high reliability and user comfort.

  • The result is a highly efficient system for maximum profitability.
  • KMT STREAMLINE SL-VI water-jet pumps with 4,137 bar/60,000 psi are available in various power categories and configurations.
KMT Streamline VI 60S PRO-3 High pressure pump, 6200 bar SKU: 253566
KMT Streamline VI 60S PRO-3 High pressure pump, 6200 bar

The 899,235 psi high-pressure pump offers the following advantages over conventional 4,100 bar water-jet cutting:

  • Higher cutting speeds
  • Improved cut edge quality
  • Reduced abrasives consumption
  • Increased productivity
  • Increased angular precision
  • Less delamination

Advantages of the PRO-III pressure booster:

  • The optimized design of SUPRALIFE high-pressure seals ensures a longer tool life
  • Patented pressure booster construction
  • Advanced heat treatment of seal head body
  • Outlet check valve made of titanium
  • Cylinder bushings made of stainless steel
  • Highly polished piston
Water-Jet height control with collision safety SKU: 252580
Water-Jet height control with collision safety
Hydro-Jet light curtains for safety on 4 sides SKU: 253576
Hydro-Jet light curtains for safety on 4 sides
Water-jet splatter guard SKU: 252988
Water-jet splatter guard
Water-Jet Drilling head SKU: 253577
Water-Jet Drilling head
Water quality stabilization system with contact water meter SKU: 253709
Water quality stabilization system with contact water meter
Refrigerated compressed air dryers SKU: 251090
Refrigerated compressed air dryers
Water-Jet Option Z.Axis 300mm SKU: 252991
Water-Jet Option Z.Axis 300mm
Water-Jet 3015 stainless steel cutting table and tank SKU: 252590
Water-Jet 3015 stainless steel cutting table and tank
Water-Jet 3015 mechanical upgrade for increased accuracy SKU: 253569
Water-Jet 3015 mechanical upgrade for increased accuracy
Water-Jet 3015 water level control SKU: 252582
Water-Jet 3015 water level control
Vacuum system for abrasive-mud removal 6 m2 SKU: 180728
Vacuum system for abrasive-mud removal 6 m2
  • Use of this fully automated abrasives removal eliminates the usually required periodic cutting tank cleaning. Can be retrofitted at a later time, if the required connectors (optional for additional cost) have been included in the original order.
  • Including DL40 vacuum/flushing pump
Secondary cutting head (CNC) for same BFT pump SKU: 253602
Secondary cutting head (CNC) for same BFT pump
Igems Nest Level 2 SKU: 251448
Igems Nest Level 2
Igems Data exchange SKU: 252155
Igems Data exchange
Igems Sign Maker SKU: 251449
Igems Sign Maker
Igems Tile Maker SKU: 251450
Igems Tile Maker
Igems optical Locator SKU: 252156
Igems optical Locator
Igems Organizer SKU: 251451
Igems Organizer
Igems Floating License SKU: 251453
Igems Floating License
Vacuum system for abrasive-mud removal for Water-Jet SKU: 253654
Vacuum system for abrasive-mud removal for Water-Jet
  • Water level control - semi-automatic
  • Return via an overflow system
  • Feed via membrane pump - manually adjustable
Vacuum system for abrasive-mud removal 4 m2 SKU: 180735
Vacuum system for abrasive-mud removal 4 m2
  • Abrasives mud extraction for cutting tanks with max. 4 m² and low cutting demand (mainly for universities)
  • Including vacuum system, inclined plate (lamella) clarifier and flap valve diaphragm pump
  • Steps and hose attachment mounts on both sides
Abrasive mud exhaust system 129 ft² ASAS ME SKU: 180736
Abrasive mud exhaust system 129 ft² ASAS ME
  • Use of this fully automated abrasives removal eliminates the usually required periodic cutting tank cleaning. Can be retrofitted at a later time, if the required connectors (optional for additional cost) have been included in the original order.
Water additive for silicate stabilization SKU: 253885
Water additive for silicate stabilization

Resources & Downloads

  • Water-Jet B 3015 Brochure.pdf (0.22MB)

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Water-Jet B 3015 - 3 axis bridge type design with Beckhoff CNC controller and integrated CAM software Contronest
Water-Jet B 3015
SKU : 166741
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.