The VHF 3 is a universal milling machine that can keep pace with the growing demands of our customers even after a good 20 years in the KNUTH catalog. Equipped with a horizontal spindle, a swiveling vertical milling head and a large clamping table, this model serves a wide range of applications. The entire VHF series is ideal for repair shops, as well as training and production departments. The complete configuration with automatic feed and digital position display enables precise production and short non-productive times.
Working Area | |
---|---|
Table set up area | 52 in x 13 in |
Table load capacity | 660 lbs |
Number of T-slots | 5 positions |
Travels | |
---|---|
Travel X-axis | 39.4 in |
Travel Y-axis | 10 in |
Travel Z-axis | 17 in |
Vertical Milling Head | |
---|---|
Throat | 8 in - 21 in |
Spindle mount | ISO 40 |
Quill stroke | 5 in |
Spindle nose-to-table surface distance | 6 in - 21 in |
Spindle speeds-stages | 8 |
Spindle speeds | 90 rpm - 2.000 rpm |
Head swivel range | ± 45° |
Rapid Feed | |
---|---|
Rapid feed X-axis | 40.31 in/min |
Rapid feed Y-axis | 40.31 in/min |
Rapid feed Z-axis | 26.38 in/min |
Horizontal milling heada | |
---|---|
Spindle speeds-stages | 12 |
Spindle speeds | 40 rpm - 1.300 rpm |
Spindle mount | ISO 40 |
Horizontal spindle-to-table surface distance | 2 in - 18 in |
Feed | |
---|---|
Quill feeds | (3) 0.003, 0.006, 0.01 in/R |
Feed speed X / Y axis-stages | 8 |
Feed speed X / Y axis | 1 in/min - 14 in/min |
Drive Capacity | |
---|---|
Motor rating feed | 0.7 Hp |
Motor rating coolant pump | 0.1 Hp |
Motor rating horizontal spindle | 3 Hp |
Motor rating vertical spindle | 3 Hp |
Measures and Weights | |
---|---|
Overall dimensions (length x width x height) | 68 in x 68 in x 92 in |
Weight | 4.180 lbs |
3-axis position indicator
3-axis position indicator
drill chuck 5/8"
cutter arbor Ø 1"
cutter arbor Ø 1.5"
collet chuck -ISO 40- with collets (0.16",0.2",0.24",0.31",0.39",0.47",0.55",0.63" diam.)
reducing sleeve ISO 40 / MT3 and ISO 40 / MT2
coolant system
chip tray
work lamp
operating tools
operator instructions
Accuracy (max. deviation):
Set = 10 pieces
Applications: Workpieces can be clamped between the divider and the tailstock for a horizontal workpiece alignment.
Upgrade to a Universal Divider
Dividing plate set for indirect dividing:
Can be used on drill presses, lathes, milling machines, etc.
Content / Set:
We will gladly assist you in making the right decision to achieve your business goals
All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.
View ServicesGet a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.
Book a DemoWe have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.
Please refresh the page and try submitting the form again.
We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.
Please refresh the page and try submitting the form again.