| Working Area |
| Cutting Width |
79 in |
| Cutting length |
157 in |
| Table height |
24 in |
| Table load capacity |
84 lbs/ft² |
| Rapid feed |
709 in/min |
| Plasma source |
Hypertherm |
| Measures and Weights |
| Weight |
7.810 lbs |
Construction
- The Plasma-Jet Compact Series set themselves apart from the Plasma-Jet TrueCut series by a fully integrated machine frame that is connected to the table via a bottom plate, so the machine can be transported in one piece and requires minimum space
- If small plasma sources (e.g. Powermax) are used, they also are stored on a shelf inside the frame
- Table is prepared for dust collection system, being equipped with electro-pneumatically actuated suction flaps for an efficient fume extraction of the segment where the cutting process is momentary in action
Transmission and drives
- Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
- Low-wear and low-maintenance helical gears are designed for continuous operation
- Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm
Cutting head
- Z axis with ball screw transmission and servo-driven automatic torch height control
- Quick-coupling for cutter head allows quick head exchanges for reduced tooling time
Control
- CNC controller from Hypertherm - Edge CONNECT
- The ProNest LT Software is delviered as standard
Please select the plasma source with the required power.
- Powermax 105 Sync Plasmaquelle ( Schneidleistung unleg.Stahl: Empfohlen: 32 mm 500 mm/min, 38 mm 250 mm/min, Trennschnitt: 50 mm 125 mm/min, Lochstechen: 22 mm)
- Maxpro 200 ( Schneidleistung unleg.Stahl: Nahezu bartfreie Schneidleistung 20 mm, Lochstechkapazität (Produktion) 32 mm, Trennschnitt* 75 mm)
- XPR 170 ( Schneidleistung unleg.Stahl: Lochstechen max. 40mm, Trennschnitt max. 60 mm )
- XPR 300 ( Schneidleistung unleg. Stahl: Lochstechen max. 50mm, Trennschnitte max. 80 mm)
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
table is prepared for filter system (automatic closure control)
panasonic servo-motors and drives
automatic torch height control with Hypertherm THC sensor
cutter torch with magnetic coupling and crash sensor
hypertherm Edge Connect CNC Unit
19” touchscreen by ELO
ethercat-E
laser pointer
proNest LT
hypertherm Edge Connect CNC Unit
Hypertherm EDGE® Connect
- EDGE® Connect, Hypertherm’s newest Computer Numeric Control (CNC) platform, delivers unmatched reliability, powerful embedded capabilities, and a high level of customizability
- With Patented CutPro® Wizard, even new operators can be cutting production parts in less than five minutes
- On-screen Software Operator’s Console (Soft OpCon) allows easy setup and operation of cutting station and manual motion
- Integrated communications with plasma and torch height control systems deliver automated and expert control using installed factory or custom cut charts
- Custom cut charts can be created and controlled in the part program or made available to the CutPro Wizard
- EDGE Connect runs on the Windows® 10 Enterprise operating system
Phoenix® buit-in software
- Phoenix® software is the core operational interface and is common across the entire Hypertherm family of CNC systems
- Contains built-in cut charts for automatically setting process parameters for mild steel, stainless, and aluminum to enable consistently optimized cutting performance
- The wizards and diagnostic support tools enable easy setup, use and rapid troubleshooting
- Built-in help and cutting optimization tips for improving table performance and process outcomes at the touch of a button
Tube cutting system, 9.8 ft, for Compact series Hypertherm systems
Tube cutting system, 9.8 ft, for Compact series Hypertherm systems
SKU: 253552
Tube cutting system, 9.8 ft, for Compact series Hypertherm systems
Tube cutting system, 19.7 ft, for Compact series Hypertherm systems
SKU: 253553
Tube cutting system, 19.7 ft, for Compact series Hypertherm systems
Maxpro 200 plasma source
SKU: 253406
Maxpro 200 plasma source
- The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
Plasma-Jet H software option: ProNest (additional cost)
SKU: 253413
Plasma-Jet H software option: ProNest (additional cost)
Plasma-Jet H software option: Common Line Cutting(additional cost)
SKU: 253414
Plasma-Jet H software option: Common Line Cutting(additional cost)
Plasma-Jet H software option: Collision Avoidance (additional cost)
SKU: 253415
Plasma-Jet H software option: Collision Avoidance (additional cost)
Plasma-Jet H software option: Chain and Bridge Cutting (additional cost)
SKU: 253416
Plasma-Jet H software option: Chain and Bridge Cutting (additional cost)
Engraving and Marker add-on for PowerMax and MaxPro
SKU: 253815
Engraving and Marker add-on for PowerMax and MaxPro
Plasma-Jet filter vacuum, 141 ft3/h
SKU: 253397
Plasma-Jet filter vacuum, 141 ft3/h
Plasma-Jet filter vacuum, 212 ft3/h
SKU: 253398
Plasma-Jet filter vacuum, 212 ft3/h
Additional tube support
SKU: 253401
Additional tube support
Additional tube support - must indicate, if round or square tubes
39" extension for tube cutting
SKU: 253402
39" extension for tube cutting
Manual chamfering unit for cutter head
SKU: 253404
Manual chamfering unit for cutter head
Square adaptor for square tube cutter unit on Plasma-Jet
SKU: 253651
Square adaptor for square tube cutter unit on Plasma-Jet
Powermax 105 Sync plasma source
SKU: 253888
Powermax 105 Sync plasma source
XPR 170 Core plasma source
SKU: 253407
XPR 170 Core plasma source
- The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
- It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 170 VWI plasma source
SKU: 253408
XPR 170 VWI plasma source
- The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
- It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 170 Optimix plasma source
SKU: 253409
XPR 170 Optimix plasma source
- The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
- It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 300 Core plasma source
SKU: 253410
XPR 300 Core plasma source
XPR 300 VWI plasma source
SKU: 253411
XPR 300 VWI plasma source
XPR 300 Optimix plasma source
SKU: 253412
XPR 300 Optimix plasma source
