| Working area |
| Cutting Width |
2000 mm |
| Cutting length |
4000 mm |
| Table height |
600 mm |
| Table load capacity |
410 kg/m2 |
| Rapid feed |
18000 mm/min |
| Plasma source |
Hypertherm |
| Measures and weights |
| Weight |
3550 kg |
Construction
- The Plasma-Jet Compact Series set themselves apart from the Plasma-Jet TrueCut series by a fully integrated machine frame that is connected to the table via a bottom plate, so the machine can be transported in one piece and requires minimum space
- If small plasma sources (e.g. Powermax) are used, they also are stored on a shelf inside the frame
- Table is prepared for dust collection system, being equipped with electro-pneumatically actuated suction flaps for an efficient fume extraction of the segment where the cutting process is momentary in action
Transmission and drives
- Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
- Low-wear and low-maintenance helical gears are designed for continuous operation
- Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm
Cutting head
- Z axis with ball screw transmission and servo-driven automatic torch height control
- Quick-coupling for cutter head allows quick head exchanges for reduced tooling time
Control
- CNC controller from Hypertherm - Edge CONNECT
- The ProNest LT Software is delviered as standard.
Please select the plasma source with the required power.
- Powermax 105 Sync Plasmaquelle ( Schneidleistung unleg.Stahl: Empfohlen: 32 mm 500 mm/min, 38 mm 250 mm/min, Trennschnitt: 50 mm 125 mm/min, Lochstechen: 22 mm)
- Maxpro 200 ( Schneidleistung unleg.Stahl: Nahezu bartfreie Schneidleistung 20 mm, Lochstechkapazität (Produktion) 32 mm, Trennschnitt* 75 mm)
- XPR 170 ( Schneidleistung unleg.Stahl: Lochstechen max. 40mm, Trennschnitt max. 60 mm )
- XPR 300 ( Schneidleistung unleg. Stahl: Lochstechen max. 50mm, Trennschnitte max. 80 mm)
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
table prepared for filter system (automatic closure control )
panasonic Servomotors qand drivers
automatic burner height control with Hypertherm THC sensor
cutting torch with magnetic coupling and crash sensor
Hypertherm Edge Connect CNC-Unit
19” touchscreen by ELO
Ethercat-E
laser pointer
3-jaw-chuck 178 mm
Hypertherm EDGE® Connect
- EDGE® Connect, Hypertherm’s newest Computer Numeric Control (CNC) platform, delivers unmatched reliability, powerful embedded capabilities, and a high level of customizability
- With Patented CutPro® Wizard, even new operators can be cutting production parts in less than five minutes
- On-screen Software Operator’s Console (Soft OpCon) allows easy setup and operation of cutting station and manual motion
- Integrated communications with plasma and torch height control systems deliver automated and expert control using installed factory or custom cut charts
- Custom cut charts can be created and controlled in the part program or made available to the CutPro Wizard
- EDGE Connect runs on the Windows® 10 Enterprise operating system
Phoenix® buit-in software
- Phoenix® software is the core operational interface and is common across the entire Hypertherm family of CNC systems
- Contains built-in cut charts for automatically setting process parameters for mild steel, stainless, and aluminum to enable consistently optimized cutting performance
- The wizards and diagnostic support tools enable easy setup, use and rapid troubleshooting
- Built-in help and cutting optimization tips for improving table performance and process outcomes at the touch of a button
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems
SKU: 253552
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems
Tube cutting system, 6,000 mm, for Compact series Hypertherm systems
SKU: 253553
Tube cutting system, 6,000 mm, for Compact series Hypertherm systems
Maxpro 200 Plasma source
SKU: 253406
Maxpro 200 Plasma source
- The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
Plasma-Jet H Softwareoption ProNest
SKU: 253413
Plasma-Jet H Softwareoption ProNest
Plasma-Jet H Softwareoption Common Line Cutting
SKU: 253414
Plasma-Jet H Softwareoption Common Line Cutting
Plasma-Jet H Softwareoption Collision Avoidance
SKU: 253415
Plasma-Jet H Softwareoption Collision Avoidance
Plasma-Jet H Softwareoption Chain and Bridge Cutting
SKU: 253416
Plasma-Jet H Softwareoption Chain and Bridge Cutting
engraving and marking system for PowerMax and MaxPro
SKU: 253815
engraving and marking system for PowerMax and MaxPro
Plasma-Jet filter extraction system 4.000 m3/h
SKU: 253397
Plasma-Jet filter extraction system 4.000 m3/h
Plasma-Jet filter extraction system 6.000 m3/h
SKU: 253398
Plasma-Jet filter extraction system 6.000 m3/h
Additional tube support
SKU: 253401
Additional tube support
Additional tube support - must indicate, if round or square tubes
1 meter extension for tube cutting
SKU: 253402
1 meter extension for tube cutting
Manual bevel device for cutting head
SKU: 253404
Manual bevel device for cutting head
Square adaptor for square tube cutter unit on Plasma-Jet
SKU: 253651
Square adaptor for square tube cutter unit on Plasma-Jet
Powermax 105 Sync plasma source
SKU: 253888
Powermax 105 Sync plasma source
XPR 170 Core Plasma source
SKU: 253407
XPR 170 Core Plasma source
- The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
- It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 170 VWI Plasma source
SKU: 253408
XPR 170 VWI Plasma source
- The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
- It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 170 Optimix Plasma source
SKU: 253409
XPR 170 Optimix Plasma source
- The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
- It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 300 Core Plasma source
SKU: 253410
XPR 300 Core Plasma source
XPR 300 VWI Plasma source
SKU: 253411
XPR 300 VWI Plasma source
XPR 300 Optimix Plasma source
SKU: 253412
XPR 300 Optimix Plasma source
