Turnado 230/2000

• Improved chip flow, longer tool service life and better cut profile
• For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
• Dilute with water 1:20
• 1 canister contains 5 Liter

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Damper elements absorb shock and vibration
• Vibration-free machine operation
• Set screws allow for easy machine alignment

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Precision needle bearing
• Hardened and ground point 60°

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

• Shank H20, B14, total 5.51"
• Incl. 2 knurl sets, angled 1 mm

• Fits all standard German quick-change tool holder
• Tool holder head and tool holder feature profile-ground gearing
• Holder height adjustment with a thumb screw

P25 indexable insert for forged, rolled and tempered steel. All tools with indexable inserts, 1 indexable insert set, tools, specifications, shank height 1"

Includes 8 different clamped turning tools:

• Turning tool, clamping system C, work piece diam. 60 mm: size: 25x25x140 mm, feed speed: 3937"/min., feed: 0.2-0.4 mm, cutting depth: 4 mm
• Tapping turning tool 60°, clamping system C: size: 25x20x120 mm, cutting point height: 1"
• Stepped, right-hand turning tool, plate form S, clamping system M, cutting length 16 mm, incl. chip chute: size: 25 x 20 x 125 mm, feed speed: 80 m/min., feed: 0.6-0.7 mm, cutting depth: 6 mm
• Curved, right-hand turning tool, plate form S, clamping system M, cutting length 0.63", incl. chip chute: size: 0.98"x0.78"x5", feed speed: 3"/min., feed: 0.016"-0.02", cutting depth: 0.16"
• Stepped, right-hand inside turning tool, clamping system C: size: 18x18x180 mm, cutting point height: 14 mm, feed speed: 60 m/min., feed: 0,2 mm, cutting depth: 4 mm
• Curved, right-hand turning tool, plate, plate form S, clamping system C, cutting length 0.63", incl. chip chute: size: 0.7"x0.7"x7", cutting point height: 0.55", feed speed: 2362"/min, feed. 0.007, cutting depth: 0.16"
• Stepped, right-hand turning tool, plate form S, clamping system M, cutting length 20 mm, incl. chip chute: size: 20 x 20 x 125 mm, feed speed: 3937"/min., feed: 0.4-0.5 mm, cutting depth: 4 mm
• Female thread turning tool, clamping system C: size: 0.7"x0.7"x7", cutting point height: 1"

• 5-piece set including indexable inserts
• Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
• Packaged in a rigid wooden box, including replacement screws and key

Universal-4-jaw lathe chuck with centric clamping action

• With short taper mount for Camlock acc. to DIN 55029
• Can be mounted with using an intermediate flange
• Chuck body made of cast iron
• Hardened and ground scroll chuck
• Ground chuck jaws
• High clamping force
• High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

• Hardened and precision-ground for maximum concentricity, MT shank and tangs
• Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.

• Universal, quick and mobile use even at limited access locations
• Safe and clean working environment
• Reduces risk of injuries caused by sharp metal edges
• Recyclable due to separable material
• Stainless steel enclosures and powerful permanent solenoids ensure a long tool life
• Adjustable rod length
• Compact dimensions: 14" - 23" long, Ø 1"
• Low weight: 1.32 lbs

• Hardened and precision-ground for maximum concentricity, MT shank and tangs
• Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.

• Chucking range 0.039"-0.51"
• Mount B 16

• Chucking range 0.12"-0.63"
• Mount B 18

• With soldered-on carbide plates for steel, 8 pieces

• 5-piece set including indexable inserts
• Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
• Packaged in a rigid wooden box, including replacement screws and key

• The standard indexable inserts can be ordered in sets
• Carbide is highly temperature-resistant and therefore offers 3x faster cutting speeds than high-speed steel (HSS)

The 9-piece turning tool set includes turning tools for plain turning, facing, chamfering, piercing, cutting off, thread cutting, and inside turning.

All turning tools in this set come with indexable inserts (carbide).

The set also includes an Allen key that is needed for changing the indexable insert.

For proper storage, the turning tools come packaged in a storage box.

• 5-piece set including indexable inserts
• Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
• Packaged in a rigid wooden box, including replacement screws and key

The 9-piece turning tool set includes turning tools for plain turning, facing, chamfering, piercing, cutting off, thread cutting, and inside turning.

All turning tools in this set come with indexable inserts (carbide).

The set also includes an Allen key that is needed for changing the indexable insert.

For proper storage, the turning tools come packaged in a storage box.

• The standard indexable inserts can be ordered in sets
• Carbide is highly temperature-resistant and therefore offers 3x faster cutting speeds than high-speed steel (HSS)

Universal-3-jaw lathe chuck with centric clamping action

• With short taper mount for Camlock acc. to DIN 55029
• Can be mounted with using an intermediate flange
• Chuck body made of cast iron
• Hardened and ground scroll chuck
• Ground chuck jaws
• High clamping force
• High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

• Soft jaw pads are bolted into base jaws
• Ideal for finishing and precision work
• Boring of workpiece form directly inside the jaws
• Already machined parts cannot be damaged during clamping

Universal-4-jaw lathe chuck with centric clamping action

• With short taper mount for Camlock acc. to DIN 55029
• Can be mounted with using an intermediate flange
• Chuck body made of cast iron
• Hardened and ground scroll chuck
• Ground chuck jaws
• High clamping force
• High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

• Soft jaw pads are bolted into base jaws
• Ideal for finishing and precision work
• Boring of workpiece form directly inside the jaws
• Already machined parts cannot be damaged during clamping

• Soft jaw pads are bolted into base jaws
• Ideal for finishing and precision work
• Boring of workpiece form directly inside the jaws
• Already machined parts cannot be damaged during clamping

4-jaw face plate lathe chuck with individually advanced clamping jaws

• With direct mount for Camlock acc. to DIN 55029
• Can be mounted with using an intermediate flange
• Chuck body made of cast iron
• Hardened and ground scroll chuck
• Ground chuck jaws
• High clamping force
• High concentricity

Includes socket spanner, lathe chuck jaws, Camlock bolts

Additional options available upon request

4-jaw face plate lathe chuck with individually advanced clamping jaws

• With direct mount for Camlock acc. to DIN 55029
• Can be mounted with using an intermediate flange
• Chuck body made of cast iron
• Hardened and ground scroll chuck
• Ground chuck jaws
• High clamping force
• High concentricity

Includes socket spanner, lathe chuck jaws, Camlock bolts

Additional options available upon request

• Soft jaw pads are bolted into base jaws
• Ideal for finishing and precision work
• Boring of workpiece form directly inside the jaws
• Already machined parts cannot be damaged during clamping

• Soft jaw pads are bolted into base jaws
• Ideal for finishing and precision work
• Boring of workpiece form directly inside the jaws
• Already machined parts cannot be damaged during clamping