Select a region
International Americas Sub-Saharan Africa Global Overview
Select a language
English Español
Turnado 230/1500 V - Featuring a powerful motor, constant cutting speed and infinitely variable spindle speed
Turnado 280/3000V is shown

Turnado 280/3000V is shown

Turnado 230/1500 V - Featuring a powerful motor, constant cutting speed and infinitely variable spindle speed
Turnado 280/3000V is shown

Turnado 230/1500 V

SKU : 320571

The turning machines of the Turnado series are characterized by their robust construction, powerful motor and versatility. For more than 20 years they have been among the tried and tested bestsellers of our conventional lathes. The V models are also equipped with an extended, infinitely variable speed range. In combination with the position indicator and integrated function of the constant cutting speed, you achieve a superior surface quality when facing. A high-quality quick-change toolholder system also lessens non-productive time and costs.

  • Classic design with sturdy construction
  • built to last
  • High motor power with inverter and spindle speed display
  • 3-axis position indicator with various turning functions
  • Constant cutting speed for superior surface quality
  • Extensive standard equipment package
Working Area
Center height 9 in
Workpiece length (max.) 59 in
Turning-Ø over support 9 in
Gap bridge length 6 in
Bed width 12 in
Turning diameter over gap bridge 27 in
In-gap diameter over bed 18 in
Details
Equipment with position indicator and infinitely variable speed adjustment
Travels
Travel X-axis 11.2 in
Travel Z1-axis 5 in
Swing range of top slide ± 52°
Headstock
Spindle mount Camlock D1-6
Spindle bore 2 in
Spindle taper 6 MT
Spindle speeds L 30-600 / H 600-3000 rpm
Feed
Feed X-axis 0.00055 in/R - 0.03087 in/R
Feed Z-axis 0.00122 in/R - 0.06693 in/R
Tapping
Tapping, metric-stages 47
Tapping, metric 0.1 mm - 14 mm
Tapping, module-stages 39
Tapping, module 0.0039 in - 0.2756 in
Tapping, withworth (60) 2-112 TPI
Tapping, diametric (50) 4-112 DP
Tailstock
Tailstock taper 4 MT
Tailstock quill stroke 5 in
Tailstock quill diameter 2 in
Tailstock traverse adjustment ± 0.51 in
Drive Capacity
Motor rating main drive 10.1 Hp
Measures and Weights
Overall dimensions (length x width x height) 109 in x 43 in x 53 in
Weight 4.334 lbs

  • Cost-effective, lasting value
  • Practically arranged control panel with ergonomic layout of selection levers
  • Camlock spindle mount D1-6
  • Wide bed, ground and hardened
  • Offset tailstock for taper turning
  • Large number of thread leads
  • Removable gap bridge for machining of large parts
  • Stop spindle with adjustable travel stops

Turnado with infinitely variable speed adjustment

  • Back gearing, first-class control technology and a powerful headstock motor allow a wide range of speeds and high torque for powerful machining

3-axis position indicator

  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.0004 / 0.0002"
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation
  • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes

3-axis position indicator
3-jaw chuck (10" diam.)
4-jaw face plate chuck (12" diam.)
face plate (13" diam.)
quick-change tool holder head WB
quick change tool holder WBD 25120
coolant system
follow and steady rests
spindle
fixed splash guard (wall)
chuck guard
foot brake pedal
LED work lamp
reducing sleeve
dead center
thread gauge
operating tools
operator instructions

Quick-Set Spindle Bore Stop Size 7 2.2-2.6 in
  • For lathes
  • Key length: 740
  • Quick and easy adjustment to any hollow-spindle point
  • Easy adjustment - just tightening with a safety wrench
Quick-Set Spindle Bore Stop Size 7 2.2-2.6 in SKU: 103022
Quick-Set Spindle Bore Stop Size 7 2.2-2.6 in
  • For lathes
  • Key length: 740
  • Quick and easy adjustment to any hollow-spindle point
  • Easy adjustment - just tightening with a safety wrench
Coolant Concentrate 5 Ltr. SKU: 103184
Coolant Concentrate 5 Ltr.
  • Improved chip flow, longer tool service life and better cut profile
  • For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
  • Dilute with water 1:20
  • 1 canister contains 5 Liter
Tool Holder WBD 25x100 SKU: 103291
Tool Holder WBD 25x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Pivoted Mounts LK 5 SKU: 103331
Pivoted Mounts LK 5
  • Damper elements absorb shock and vibration
  • Vibration-free machine operation
  • Set screws allow for easy machine alignment
Tool Holder WBD 25x140 SKU: 103292
Tool Holder WBD 25x140
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WBD 32x120 SKU: 103293
Tool Holder WBD 32x120
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WBD 32x140 SKU: 103294
Tool Holder WBD 32x140
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Live Center MT 4 SKU: 106755
Live Center MT 4
  • Precision needle bearing
  • Hardened and ground point 60°
Tool Holder WBH 32x130 SKU: 103295
Tool Holder WBH 32x130
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WBJ 40x120 SKU: 103296
Tool Holder WBJ 40x120
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Cut-off insert holder WBA-A2a SKU: 103297
Cut-off insert holder WBA-A2a
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Knurl Holder SKU: 108520
Knurl Holder
  • Shank H20, B14, total 5.51"
  • Incl. 2 knurl sets, angled 1 mm
Knurl Set, angles SKU: 108521
Knurl Set, angles
Tool Holder WBH 18x120 SKU: 103298
Tool Holder WBH 18x120
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Clamped Turning Tool Set 0.98 in SKU: 108670
Clamped Turning Tool Set 0.98 in

P25 indexable insert for forged, rolled and tempered steel. All tools with indexable inserts, 1 indexable insert set, tools, specifications, shank height 1"

Includes 8 different clamped turning tools:

  • Turning tool, clamping system C, work piece diam. 60 mm: size: 25x25x140 mm, feed speed: 3937"/min., feed: 0.2-0.4 mm, cutting depth: 4 mm
  • Tapping turning tool 60°, clamping system C: size: 25x20x120 mm, cutting point height: 1"
  • Stepped, right-hand turning tool, plate form S, clamping system M, cutting length 16 mm, incl. chip chute: size: 25 x 20 x 125 mm, feed speed: 80 m/min., feed: 0.6-0.7 mm, cutting depth: 6 mm
  • Curved, right-hand turning tool, plate form S, clamping system M, cutting length 0.63", incl. chip chute: size: 0.98"x0.78"x5", feed speed: 3"/min., feed: 0.016"-0.02", cutting depth: 0.16"
  • Stepped, right-hand inside turning tool, clamping system C: size: 18x18x180 mm, cutting point height: 14 mm, feed speed: 60 m/min., feed: 0,2 mm, cutting depth: 4 mm
  • Curved, right-hand turning tool, plate, plate form S, clamping system C, cutting length 0.63", incl. chip chute: size: 0.7"x0.7"x7", cutting point height: 0.55", feed speed: 2362"/min, feed. 0.007, cutting depth: 0.16"
  • Stepped, right-hand turning tool, plate form S, clamping system M, cutting length 20 mm, incl. chip chute: size: 20 x 20 x 125 mm, feed speed: 3937"/min., feed: 0.4-0.5 mm, cutting depth: 4 mm
  • Female thread turning tool, clamping system C: size: 0.7"x0.7"x7", cutting point height: 1"
Reduction Sleeve MT 4/1 SKU: 103820
Reduction Sleeve MT 4/1
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
Reduction Sleeve MT 4/2 SKU: 103825
Reduction Sleeve MT 4/2
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
Indexable Insert Set 0.98 in, 30 pcs. SKU: 108675
Indexable Insert Set 0.98 in, 30 pcs.
  • 5-piece set including indexable inserts
  • Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
  • Packaged in a rigid wooden box, including replacement screws and key
Power Worker Metal Cutter SKU: 123040
Power Worker Metal Cutter
  • Universal, quick and mobile use even at limited access locations
  • Safe and clean working environment
  • Reduces risk of injuries caused by sharp metal edges
  • Recyclable due to separable material
  • Stainless steel enclosures and powerful permanent solenoids ensure a long tool life
  • Adjustable rod length
  • Compact dimensions: 14" - 23" long, Ø 1"
  • Low weight: 1.32 lbs
Reduction Sleeve MT 4/3 SKU: 103830
Reduction Sleeve MT 4/3
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
4-Jaw Lathe Chuck Steel 10 in SKU: 146473
4-Jaw Lathe Chuck Steel 10 in

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

Extension Sleeve MT 4/5 SKU: 104670
Extension Sleeve MT 4/5
  • With inside and outside Morse taper shank
  • With tangs
  • Fully hardened and ground
  • Maximum concentricity
Tool Holder Bit MT4 / B16 SKU: 104745
Tool Holder Bit MT4 / B16
  • Hardened and precision-ground for maximum concentricity, MT shank and tangs
  • Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.
Tool Holder Bit MT4 / B18 SKU: 104750
Tool Holder Bit MT4 / B18
  • Hardened and precision-ground for maximum concentricity, MT shank and tangs
  • Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.
Keyless Drill Chuck 0.04-0.5 in B 16 SKU: 104765
Keyless Drill Chuck 0.04-0.5 in B 16
  • Chucking range 0.039"-0.51"
  • Mount B 16
Keyless Drill Chuck 0.12-0.63 in B 18 SKU: 104770
Keyless Drill Chuck 0.12-0.63 in B 18
  • Chucking range 0.12"-0.63"
  • Mount B 18
Turning Tool Set 8 pcs., 0.78 in SKU: 108700
Turning Tool Set 8 pcs., 0.78 in
  • With soldered-on carbide plates for steel, 8 pieces
Clamped Turning Tool Set 0.78 in SKU: 108773
Clamped Turning Tool Set 0.78 in
  • 5-piece set including indexable inserts
  • Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
  • Packaged in a rigid wooden box, including replacement screws and key
Replacem. 0.5/0.6/0.8 in 5pc / Clamping Turning Tool SKU: 108775
Replacem. 0.5/0.6/0.8 in 5pc / Clamping Turning Tool
  • The standard indexable inserts can be ordered in sets
  • Carbide is highly temperature-resistant and therefore offers 3x faster cutting speeds than high-speed steel (HSS)
Clamped Turning Tool Set 0.78 in, 9-pc SKU: 108778
Clamped Turning Tool Set 0.78 in, 9-pc

The 9-piece turning tool set includes turning tools for plain turning, facing, chamfering, piercing, cutting off, thread cutting, and inside turning.

All turning tools in this set come with indexable inserts (carbide).

The set also includes an Allen key that is needed for changing the indexable insert.

For proper storage, the turning tools come packaged in a storage box.

Indexable Insert Set 0.8 in, 30-pc SKU: 108779
Indexable Insert Set 0.8 in, 30-pc
  • 5-piece set including indexable inserts
  • Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
  • Packaged in a rigid wooden box, including replacement screws and key
Clamped Turning Tool Set 0.6/0.8/0.9 in, 9-pc SKU: 108780
Clamped Turning Tool Set 0.6/0.8/0.9 in, 9-pc

The 9-piece turning tool set includes turning tools for plain turning, facing, chamfering, piercing, cutting off, thread cutting, and inside turning.

All turning tools in this set come with indexable inserts (carbide).

The set also includes an Allen key that is needed for changing the indexable insert.

For proper storage, the turning tools come packaged in a storage box.

Indexable Insert Set 0.6/0.8/0.9 in, 30-pc SKU: 108782
Indexable Insert Set 0.6/0.8/0.9 in, 30-pc
  • The standard indexable inserts can be ordered in sets
  • Carbide is highly temperature-resistant and therefore offers 3x faster cutting speeds than high-speed steel (HSS)
Soft Jaw Pads 8 in SKU: 116551
Soft Jaw Pads 8 in
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
Soft Jaw Pads 200 SKU: 116651
Soft Jaw Pads 200
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
3-Jaw Lathe Chuck Steel 7.9 in SKU: 146372
3-Jaw Lathe Chuck Steel 7.9 in
4-Jaw Lathe Chuck Steel 8 in SKU: 146472
4-Jaw Lathe Chuck Steel 8 in

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

Resources & Downloads

  • Turnado 230/1500 V Brochure.pdf (0.18MB)

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Turnado 230/1500 V - Featuring a powerful motor, constant cutting speed and infinitely variable spindle speed
Turnado 230/1500 V
SKU : 320571
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.