| Working Area |
| Cutting Width |
59 in |
| Cutting length |
118 in |
| Table height |
28 in |
| Table load capacity |
106 lbs/ft² |
| Rapid feed |
709 in/min |
| Plasma source |
Kjellberg |
| Measures and Weights |
| Weight |
6.820 lbs |
Construction
- Stand-alone cutter table features rigid steel construction for high load capacity
- Stand-alone table eliminates thermal and mechanical influences on the plasma cutter system
- Table is prepared for dust collection system, being equipped with electro-pneumatically actuated suction flaps for an efficient fume extraction of the segment where the cutting process is momentary in action
Transmission and drives
- Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
- Low-wear and low-maintenance helical gears are designed for continuous operation
- Linear guides on all axes are designed for long life and smooth motion even at high speeds. Linear guides on X and Y axes are 0.79/1.18" wide
- The structure of the machine and the selection of components are designed to enable multi-shift operation
Cutting head
- Z axis with ball screw transmission and servo-driven automatic torch height control
- Quick-coupling for cutter head allows quick head exchanges for reduced tooling time
- Use the existing cutting parameters stored in the control to find the optimum cut
- Optimum bed speed even for fine contours and tight radii
- Available with 5-axis cutter head, tube cutter, and many more options
Control
- CNC controller from Eckelmann
- The Eckelmann IBE nesting software is delviered as standard
Please select the plasma source with the required power.
- Smart Focus 130 – maximum cutting capacity 1.6 inch, plunge-cuts 1 inch, recommended range 0.04 – 1.2 inch
- Smart Focus 170 – maximum cutting capacity 50mm, plunge-cuts 30mm, recommended range 1-35 mm
- Smart Focus 200 – maximum cutting capacity 2.4 inch, plunge-cuts 1.2 inch, recommended range 0.04 – 1.6 inch
- Smart Focus 300 – maximum cutting capacity 3 inch, plunge-cuts 1.6 inch, recommended range 0.04 – 2 inch
- Smart Focus 400 – maximum cutting capacity 4 inch, plunge-cuts 2 inch, recommended range for stainless steel 0.04-3 inch
- Q 1500 – maximum cutting capacity 60 mm, plunge-cuts 30 mm, recommended range 0,5–40 mm
- Q 3000 – maximum cutting capacity 80mm, plunge-cuts 50mm, recommended range 0,5 – 60 mm
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
table is prepared for filter system (automatic closure control)
panasonic servo-motors and drives
automatic torch height control by Eckelmann
cutter torch with magnetic coupling and crash sensor
eckelmann CNC unit
19” touchscreen by ELO
A-Module by Beckhoff
laser pointer
eckelmann IBE Software cncCUT Nest
eckelmann CNC unit
Eckelmann E°EXC 880 E°CUT ECO
- These application optimized CNC controles have extremely short cycle times, making them ideal for highy dynamic applications
- The HMI offers a clearly structured design with greater user comfort thanks to its simnplicity, yet providing intuitive access to all functions of the machine
VT Kit PerCut 2000 BSt 200A
VT Kit PerCut 2000 BSt 200A
SKU: 253092
VT Kit PerCut 2000 BSt 200A
VT Kit PerCut 2000 CrNi 200A
SKU: 253093
VT Kit PerCut 2000 CrNi 200A
VT Kit PerCut 4000 BSt 300A
SKU: 253094
VT Kit PerCut 4000 BSt 300A
VT Kit PerCut 4000 CrNi 300A
SKU: 253095
VT Kit PerCut 4000 CrNi 300A
Additional VT 360/400A additional to Part No. 253092-253095
SKU: 253096
Additional VT 360/400A additional to Part No. 253092-253095
Ext. Safety guard 15 bar 1/4" O2 for oxy-fuel cutting
SKU: 253097
Ext. Safety guard 15 bar 1/4" O2 for oxy-fuel cutting
Pressure reducer 1-step air 290 psi
SKU: 253100
Pressure reducer 1-step air 290 psi
Pressure reducer 1-step Ar/Co2 290 psi
SKU: 253101
Pressure reducer 1-step Ar/Co2 290 psi
Pressure reducer 1-step H2 290 psi
SKU: 253102
Pressure reducer 1-step H2 290 psi
Pressure reducer 1-step N2 290 psi
SKU: 253103
Pressure reducer 1-step N2 290 psi
Pressure reducer 1-step O2 290 psi
SKU: 253104
Pressure reducer 1-step O2 290 psi
Additional tube support
SKU: 253401
Additional tube support
Additional tube support - must indicate, if round or square tubes
39" extension for tube cutting
SKU: 253402
39" extension for tube cutting
Manual chamfering unit for cutter head
SKU: 253404
Manual chamfering unit for cutter head
Tanaka oxy-fuel cutter head
SKU: 253592
Tanaka oxy-fuel cutter head
Square adaptor for square tube cutter unit on Plasma-Jet
SKU: 253651
Square adaptor for square tube cutter unit on Plasma-Jet
Upg. from Q 1500 to Q 1500 Plus all-gas plasma source
SKU: 253866
Upg. from Q 1500 to Q 1500 Plus all-gas plasma source
Upg. from Q 3000 to Q 3000 Plus all-gas plasma source
SKU: 253867
Upg. from Q 3000 to Q 3000 Plus all-gas plasma source
Q 3000 all-gas plasma source
SKU: 253883
Q 3000 all-gas plasma source
Plasma Cutting 4.0
The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production
- Complete new development with more than 60 years of Kjellberg know-how
- Inverter power source – digitally controlled, fully electronic process flow
- Modular design – subsequent upgrading of system performance possible
- Best cutting and marking quality – new Q-Mark and Q-Hole technologies
- Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
- Low cost per meter cut – improved cutting speed, longer lifetime of consumables
- Visualisation of machine, process and consumption information
- Preventive inspection and maintenance analysis
- Interactive database, training and service updates
Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.
Smart Focus 170 plasma source with automatic gas console
SKU: 253881
Smart Focus 170 plasma source with automatic gas console
Power supply
- Flexible CNC-controlled cutting of any electrically conducting materials with thicknesses up to 1.97"
- Recommended cutting range is from 0.039 to 1.38" material thickness
- Maximum piercing depth is 1.18"
- Suitable for use under the most demanding conditions
- Easy operation and maintenance
- Cutting, scribe marking, notching and punching without replacement of wear parts
- Uses the patented plasma cutting technologies Contour Cut and Contour Cut Speed
- Secondary gas ignition prolongs consumable life and swirl gas technology is used for hole piercing to preserve nozzles
- This plasma cutter is an ideal plasma cutting machine for metal construction and mechanical engineering, contract cutting operations, steel structures and construction, systems and container construction and much more.
Technologies
- Contour Cut: For precise cutting of small contours, narrow lands, small radii and other geometries
- Contour Cut Speed: Best cutting performance at highest cutting speeds, ideal for highes quality demands
- Silent Cut: For cutting structural steel with reduced noise level
Plasma torch
- PerCut 2000 machine torch with quick-changing head and interior contact for initial position sensor
- Significantly less gas consumption than competitor models due to an effective liquid cooling system that includes the nozzle tip
- The same consumables are used for cutting and scribe marking
- Automatic PGV-300 gas console for the automatic control of gases based on material grade and material thickness using integrated databases
Q 1500 all-gas plasma source
SKU: 253882
Q 1500 all-gas plasma source
Plasma Cutting 4.0
The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production
- Complete new development with more than 60 years of Kjellberg know-how
- Inverter power source – digitally controlled, fully electronic process flow
- Modular design – subsequent upgrading of system performance possible
- Best cutting and marking quality – new Q-Mark and Q-Hole technologies
- Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
- Low cost per meter cut – improved cutting speed, longer lifetime of consumables
- Visualisation of machine, process and consumption information
- Preventive inspection and maintenance analysis
- Interactive database, training and service updates
Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.
Smart Focus 400 Plasma source
SKU: 253880
Smart Focus 400 Plasma source
Plasma Cutting
- The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
- Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.
Advantages
- Superior cut quality
- High cutting speed
- Tight perpendicularity tolerance
- User-friendly and low maintenance
- Less cost per cut
Contour Cut (CC) technology
- All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
- Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
- Using Contour Cut Speed, contours can be cut up to 50% faster
Torch and gas control – smart redesign
- The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
- These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
- The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
- Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
Smart Focus 300 Plasma source
SKU: 253879
Smart Focus 300 Plasma source
Plasma Cutting
- The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
- Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.
Advantages
- Superior cut quality
- High cutting speed
- Tight perpendicularity tolerance
- User-friendly and low maintenance
- Less cost per cut
Contour Cut (CC) technology
- All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
- Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
- Using Contour Cut Speed, contours can be cut up to 50% faster
Torch and gas control – smart redesign
- The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
- These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
- The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
- Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
Smart Focus 200 Plasma source
SKU: 253878
Smart Focus 200 Plasma source
Plasma Cutting
- The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
- Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.
Advantages
- Superior cut quality
- High cutting speed
- Tight perpendicularity tolerance
- User-friendly and low maintenance
- Less cost per cut
Contour Cut (CC) technology
- All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
- Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
- Using Contour Cut Speed, contours can be cut up to 50% faster
Torch and gas control – smart redesign
- The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
- These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
- The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
- Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
Smart Focus 130 plasma source
SKU: 253877
Smart Focus 130 plasma source
Plasma Cutting
- The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
- Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.
Advantages
- Superior cut quality
- High cutting speed
- Tight perpendicularity tolerance
- User-friendly and low maintenance
- Less cost per cut
Contour Cut (CC) technology
- All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
- Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
- Using Contour Cut Speed, contours can be cut up to 50% faster
Torch and gas control – smart redesign
- The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
- These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
- The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
- Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
5-axis chamfering and tube cutting system, 118", for Kjellberg systems
SKU: 253876
5-axis chamfering and tube cutting system, 118", for Kjellberg systems
5-axis chamfering for Kjellberg systems
SKU: 253872
5-axis chamfering for Kjellberg systems
Plasma-Jet filter vacuum, 141 ft3/h
SKU: 253397
Plasma-Jet filter vacuum, 141 ft3/h
Plasma-Jet filter vacuum, 212 ft3/h
SKU: 253398
Plasma-Jet filter vacuum, 212 ft3/h
VT Kit PerCut 2000 BSt 200A
SKU: 540681
VT Kit PerCut 2000 BSt 200A
VT Kit PerCut 2000 BSt 200A
SKU: 540682
VT Kit PerCut 2000 BSt 200A
