Plasma-Jet Compact K 3060

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Power supply

• Flexible CNC-controlled cutting of any electrically conducting materials with thicknesses up to 1.97"
• Recommended cutting range is from 0.039 to 1.38" material thickness
• Maximum piercing depth is 1.18"
• Suitable for use under the most demanding conditions
• Easy operation and maintenance
• Cutting, scribe marking, notching and punching without replacement of wear parts
• Uses the patented plasma cutting technologies Contour Cut and Contour Cut Speed
• Secondary gas ignition prolongs consumable life and swirl gas technology is used for hole piercing to preserve nozzles
• This plasma cutter is an ideal plasma cutting machine for metal construction and mechanical engineering, contract cutting operations, steel structures and construction, systems and container construction and much more.

Technologies

• Contour Cut: For precise cutting of small contours, narrow lands, small radii and other geometries
• Contour Cut Speed: Best cutting performance at highest cutting speeds, ideal for highes quality demands
• Silent Cut: For cutting structural steel with reduced noise level

Plasma torch

• PerCut 2000 machine torch with quick-changing head and interior contact for initial position sensor
• Significantly less gas consumption than competitor models due to an effective liquid cooling system that includes the nozzle tip
• The same consumables are used for cutting and scribe marking
• Automatic PGV-300 gas console for the automatic control of gases based on material grade and material thickness using integrated databases

Plasma Cutting 4.0

The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production

• Complete new development with more than 60 years of Kjellberg know-how
• Inverter power source – digitally controlled, fully electronic process flow
• Modular design – subsequent upgrading of system performance possible
• Best cutting and marking quality – new Q-Mark and Q-Hole technologies
• Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
• Low cost per meter cut – improved cutting speed, longer lifetime of consumables
• Visualisation of machine, process and consumption information
• Preventive inspection and maintenance analysis
• Interactive database, training and service updates

Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.

Plasma Cutting 4.0

The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production

• Complete new development with more than 60 years of Kjellberg know-how
• Inverter power source – digitally controlled, fully electronic process flow
• Modular design – subsequent upgrading of system performance possible
• Best cutting and marking quality – new Q-Mark and Q-Hole technologies
• Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
• Low cost per meter cut – improved cutting speed, longer lifetime of consumables
• Visualisation of machine, process and consumption information
• Preventive inspection and maintenance analysis
• Interactive database, training and service updates

Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.

• The CutFire 100i is a powerful air/plasma system available at low cost, but suitable for wide variety of applications.
• It is equipped with the latest inverter technology and is one of the few air-cooled systems on the market that offers a duty cycle of 100%. 
• The cutting inverters CutFire 100i built in or after 2017 are equipped with the new Flash 101 machine torch. With its new consumables the torch uses air as swirl gas. The air rotating around the plasma arc stabilizes the arc to allow up to 0.8" deep piercing cuts.
• The cooling and protective effect of the swirl gas ensures higher cutting speeds and longer consumable life.
• The CutFire 100i is ideally suited for cutting thin sheets for ventilation systems and control cabinet construction, metal building applications, as well as many other craft, production and industrial operations.

CutFire 100i Advantages:

• Piercing up to 0.8" • Precision cutting up to 0.12" • Higher piercing safety • New consumables • High cutting speeds • Electrical contact for finding the initial position (Option) • Swirl gas technology

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Highly efficient dust collector and filtration unit, synchronized with the CNC machine, specially designed for extraction and filtration of dust and fume generated during the cutting process.

• - Paper filters from polyester non-woven with PTFE membrane - 99,9% absorption rate of particles between 0,2 – 2 microns - Auto jet pulse self-cleaning system - Integrated spark separator function

Additional tube support - must indicate, if round or square tubes