Select a region
International Americas Sub-Saharan Africa Global Overview
Select a language
English Español
Basic 180 V - With extra wide bed, infinitely variable spindle speed and constant cutting speed for series production
Basic 180 V - With extra wide bed, infinitely variable spindle speed and constant cutting speed for series production

Basic 180 V

SKU : 300807

Basic 180 V is one of the heaviest machines in this popular market segment. With a bed width of 206 mm (8 in) and a 30 percent higher total weight, its solid construction has a positive effect on the processing quality. This lathe also enables heavier machining operations that meet industrial requirements. Equipped with an inverter, it can easily reach 3,000 revolutions per minute. The constant cutting speed function also ensures surface qualities comparable to that of a CNC lathe when facing.

  • Very large bed width for maximum stability
  • Constant cutting speed
  • High spindle speed and motor power
  • Extensive standard equipment for a wide range of applications
Working Area
Turning diameter over bed 14 in
Turning-Ø over support 9 in
Gap bridge length 8 in
Bed width 8 in
Center width 39.37 in
Turning diameter over gap bridge 20 in
Travels
Travel X-axis 7 in
Travel Z1-axis 4 in
Swing range of top slide ± 50°
Headstock
Spindle mount Camlock D1-4
Spindle bore 1 in
Spindle taper 5 MT
Speed range, high 550 rpm - 3.000 rpm
Speed range, low 30 rpm - 550 rpm
Feed
Feed X-axis 0.00055 in/R - 0.00811 in/R
Feed Z-axis 0.00169 in/R - 0.02571 in/R
Tapping
Tapping, withworth (28) 4-56 TPI
Tapping, metric (37) 0.02-0.3
Tailstock
Tailstock taper 3 MT
Tailstock quill stroke 5 in
Tailstock quill diameter 2 in
Tailstock traverse adjustment ± 0.5 in
Drive Capacity
Motor rating main drive 5.4 Hp
Measures and Weights
Overall dimensions (length x width x height) 77 in x 30 in x 62 in
Weight 1.936 lbs

  • Cast-iron bed, heavily ribbed
  • All box ways are induction-hardened and precision-ground
  • Headstock with D1-4' mount, bore diam. 1,5", run in 2 adjustable tapered roller bearings
  • All gears are made of Cr-Ni steel, hardened, precision-ground, with oil-bath lubrication
  • Tailstock can be moved ± 0.4 in for taper turning
  • Guides are adjustable via tapered gibs
  • Test certificate in accordance with DIN
  • Including 3-axis position indicator, fully assembled

3-axis position indicator

  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.0004 / 0.0002"
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation
  • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes
  • Position indicator with speed display
  • Infinitely variable spindle speed on 2 gear levels
  • Speed up to 3000 rpm
  • Constant cutting speed: speed adapts to the part radius - constant speed ensures uniform quality finish at any diameter.
  • Main motor rating 5.5 Hp

3-axis position indicator
4-jaw face plate chuck Ø 8"
face plate Ø 12"
change gears
quick change tool holder head WE
quick change tool holder WED 20100
coolant system
steady and follow rests
chip tray
fixed splash guard (wall)
chuck guard
foot brake pedal
base
LED work lamp
micrometer longitudinal stop
reducing sleeves
dead center
thread gauge
operating tools
operator instructions

3-Jaw Lathe Chuck Steel 6 in
3-Jaw Lathe Chuck Steel 6 in SKU: 146378
3-Jaw Lathe Chuck Steel 6 in
4-Jaw Lathe Chuck Steel 6 inch SKU: 116600
4-Jaw Lathe Chuck Steel 6 inch

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

Clamped Turning Tool Set 0.6 in SKU: 108772
Clamped Turning Tool Set 0.6 in
  • 5-piece set including indexable inserts
  • Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
  • Packaged in a rigid wooden box, including replacement screws and key
Replacem. 0.5/0.6/0.8 in 5pc / Clamping Turning Tool SKU: 108775
Replacem. 0.5/0.6/0.8 in 5pc / Clamping Turning Tool
  • The standard indexable inserts can be ordered in sets
  • Carbide is highly temperature-resistant and therefore offers 3x faster cutting speeds than high-speed steel (HSS)
Quick-Set Spindle Bore Stop Size 4 1.2-1.5 inch SKU: 103016
Quick-Set Spindle Bore Stop Size 4 1.2-1.5 inch
  • For lathes
  • Key length: 640
  • Quick and easy adjustment to any hollow-spindle point
  • Easy adjustment - just tightening with a safety wrench
Tool Holder WED 20x100 SKU: 103281
Tool Holder WED 20x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WED 25x100 SKU: 103282
Tool Holder WED 25x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WEH 30x100 SKU: 103283
Tool Holder WEH 30x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WEJ 40x100 SKU: 103285
Tool Holder WEJ 40x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Cut-off insert holder WEA-A2a SKU: 103286
Cut-off insert holder WEA-A2a
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Reduction Sleeve MT 3/1 SKU: 103810
Reduction Sleeve MT 3/1
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
Reduction Sleeve MT 3/2 SKU: 103815
Reduction Sleeve MT 3/2
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
Extension Sleeve MT 3/4 SKU: 104665
Extension Sleeve MT 3/4
  • With inside and outside Morse taper shank
  • With tangs
  • Fully hardened and ground
  • Maximum concentricity
Tool Holder Bit MT 3 / B 16 SKU: 104739
Tool Holder Bit MT 3 / B 16
  • Hardened and precision-ground for maximum concentricity, MT shank and tangs
  • Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.
Tool Holder Bit MT 3 / B 18 SKU: 104740
Tool Holder Bit MT 3 / B 18
  • Hardened and precision-ground for maximum concentricity, MT shank and tangs
  • Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.
Keyless Drill Chuck 0.04-0.5 in B 16 SKU: 104765
Keyless Drill Chuck 0.04-0.5 in B 16
  • Chucking range 0.039"-0.51"
  • Mount B 16
Keyless Drill Chuck 0.12-0.63 in B 18 SKU: 104770
Keyless Drill Chuck 0.12-0.63 in B 18
  • Chucking range 0.12"-0.63"
  • Mount B 18
Knurl Holder SKU: 108520
Knurl Holder
  • Shank H20, B14, total 5.51"
  • Incl. 2 knurl sets, angled 1 mm
Knurl Set, angles SKU: 108521
Knurl Set, angles
Hydraulic measuring tripod SKU: 108810
Hydraulic measuring tripod
  • Central clamping with 1 rotating knob
  • Hydraulics ensure high clamping force
  • Base 2.5 x 2 x 2.5"
  • Holding power 110 lbs
Soft Jaw Pads 6 in SKU: 116550
Soft Jaw Pads 6 in
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
Soft Jaw Pads 8 in SKU: 116551
Soft Jaw Pads 8 in
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
4-Jaw Lathe Chuck Steel 8 in SKU: 116601
4-Jaw Lathe Chuck Steel 8 in

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

Soft Jaw Pads 160 SKU: 116650
Soft Jaw Pads 160
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
Soft Jaw Pads 200 SKU: 116651
Soft Jaw Pads 200
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
4-Jaw Face Plate Chuck 7.87 in SKU: 116670
4-Jaw Face Plate Chuck 7.87 in

4-jaw face plate lathe chuck with individually advanced clamping jaws

  • With direct mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of cast iron
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, lathe chuck jaws, Camlock bolts

Additional options available upon request

Soft Jaw Pads 8 in SKU: 116690
Soft Jaw Pads 8 in
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
Coolant Concentrate 5 Ltr. SKU: 103184
Coolant Concentrate 5 Ltr.
  • Improved chip flow, longer tool service life and better cut profile
  • For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
  • Dilute with water 1:20
  • 1 canister contains 5 Liter
Live Center MT 3 SKU: 106750
Live Center MT 3
  • Precision needle bearing
  • Hardened and ground point 60°
Live Centers, assortment MT 3 SKU: 106785
Live Centers, assortment MT 3
  • With 7 replaceable centers
  • Body made of hardened and ground tool steel
  • Precision needle bearing ensures high concentricity, long life and high load capacity
  • Mushroom diameters up to 1.27"
Power Worker Metal Cutter SKU: 123040
Power Worker Metal Cutter
  • Universal, quick and mobile use even at limited access locations
  • Safe and clean working environment
  • Reduces risk of injuries caused by sharp metal edges
  • Recyclable due to separable material
  • Stainless steel enclosures and powerful permanent solenoids ensure a long tool life
  • Adjustable rod length
  • Compact dimensions: 14" - 23" long, Ø 1"
  • Low weight: 1.32 lbs
Pivoted Mounts LK 3 SKU: 103330
Pivoted Mounts LK 3
  • Damper elements absorb shock and vibration
  • Vibration-free machine operation
  • Set screws allow for easy machine alignment
Accessory-Set MT 3, 7-pc. SKU: 104593
Accessory-Set MT 3, 7-pc.
  • Incl. keyless drill chuck and drill chuck arbors
  • In wooden case

Content / Set:

  • Reducing sleeve: MT 3 / MT 2
  • Reducing sleeve: MT 3 / MT 1
  • Extension Sleeve: MT 3 / MT 4
  • Tool holder bit: MT 3 / B 18
  • Tool holder bit: MT 3 / B 16
  • Keyless drill chuck: 0.12"-0.63" / B 18
  • Keyless drill chuck: 0.039"-0.51" / B 16

Resources & Downloads

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Basic 180 V - With extra wide bed, infinitely variable spindle speed and constant cutting speed for series production
Basic 180 V
SKU : 300807
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.