Select a region
International Americas Sub-Saharan Africa Global Overview
Basic 170 Super - Solid precision bench lathe with large center width
Long workpieces are supported in rigid rests

Long workpieces are supported in rigid rests

Micrometer bed stop ensures repeatability

Micrometer bed stop ensures repeatability

The thread gauge allows for resuming the thread after the apron nut for retrograde motion has been opened

The thread gauge allows for resuming the thread after the apron nut for retrograde motion has been opened

Basic 170 Super - Solid precision bench lathe with large center width
Long workpieces are supported in rigid rests
Micrometer bed stop ensures repeatability
The thread gauge allows for resuming the thread after the apron nut for retrograde motion has been opened

Basic 170 Super

SKU : 300815

The Basic 170 Super is a versatile lathe for single part production. Due to the large selection of optional accessories, these models are the best choice for repair, training and workshops of all kinds.

  • Compact design for small footprint
  • Extensive standard equipment for a wide range of applications
  • 3-axis position indicator with turning functions
Working area
Center width 1000 mm
Turning diameter over bed 330 mm
Turning-Ø over support 198 mm
Travels
Travel X-axis 170 mm
Travel Z1-axis 95 mm
Swing range of top slide ± 360°
Headstock
Spindle speed 70 1/min - 2000 1/min
Spindle bore 38 mm
Spindle mount Camlock D1-4
Spindle taper 5 MT
Feed
Feed X-axis 0.014 mm/R - 0.38 mm/R
Feed Z-axis 0.052 mm/R - 1.392 mm/R
Tapping
Tapping, metric (26) 0,4-7 mm
Tapping, whithworth (34) 4-56 TPI
Tailstock
Tailstock quill diameter 33 mm
Tailstock taper 3 MT
Tailstock quill stroke 100 mm
Tailstock traverse adjustment ± 10 mm
Drive capacity
Motor rating main drive 1.5 kW
Measures and weights
Overall dimensions (length x width x height) 1.83 m x 0.68 m x 1.32 m
Weight 520 kg

  • Hardened and ground headstock gears
  • Max. spindle speed 2000 rpm
  • Adjustable headstock bearing
  • Cast-iron bed, double v-guide, hardened and ground
  • Interlock to prevent simultaneous operation of lead screw and feed shaft feed
  • Oil-bath lubricated main drive and feed gear
  • Double-walled apron box with oil-bath lubrication
  • All guideways are adjustable

3-axis position indicator

  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.01/ 0.005 mm
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation
  • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes

3-axis position indicator
3-jaw chuck Ø 160 mm
4-jaw face plate chuck Ø 200 mm
face plate Ø 280 mm
quick change tool holder head WE
quick change tool holder WED 20100
steady and follow rests
fixed splash guard (wall)
chuck guard
foot brake pedal
base
work lamp
dead center
operating tools
operator instructions

4-jaw chuck 160mm D1-4 (steel)

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

4-jaw chuck 160mm D1-4 (steel) SKU: 116600
4-jaw chuck 160mm D1-4 (steel)

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

Clamped Turning Tool Set 16 mm SKU: 108772
Clamped Turning Tool Set 16 mm
  • 5-piece set including indexable inserts
  • Includes the following: Turning tool - right 90°, right 45°, straight, left 90°, left 45°
  • Packaged in a rigid wooden box, including replacement screws and key
Replacem. 12/16/20 mm 5pc / Clamping Turning Tool SKU: 108775
Replacem. 12/16/20 mm 5pc / Clamping Turning Tool
  • The standard indexable inserts can be ordered in sets
  • Carbide is highly temperature-resistant and therefore offers 3x faster cutting speeds than high-speed steel (HSS)
Tool Holder WED 20x100 SKU: 103281
Tool Holder WED 20x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WED 25x100 SKU: 103282
Tool Holder WED 25x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WEH 30x100 SKU: 103283
Tool Holder WEH 30x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Tool Holder WEJ 40x100 SKU: 103285
Tool Holder WEJ 40x100
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Cut-off insert holder WEA-A2a SKU: 103286
Cut-off insert holder WEA-A2a
  • Fits all standard German quick-change tool holder
  • Tool holder head and tool holder feature profile-ground gearing
  • Holder height adjustment with a thumb screw
Reduction Sleeve MT 3/1 SKU: 103810
Reduction Sleeve MT 3/1
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
Reduction Sleeve MT 3/2 SKU: 103815
Reduction Sleeve MT 3/2
  • Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
  • The sleeves are hardened to ensure a secure hold, and ground inside and outside
Extension Sleeve MT 3/4 SKU: 104665
Extension Sleeve MT 3/4
  • With inside and outside Morse taper shank
  • With tangs
  • Fully hardened and ground
  • Maximum concentricity
Tool Holder Bit MT 3 / B 16 SKU: 104739
Tool Holder Bit MT 3 / B 16
  • Hardened and precision-ground for maximum concentricity, MT shank and tangs
  • Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.
Tool Holder Bit MT 3 / B 18 SKU: 104740
Tool Holder Bit MT 3 / B 18
  • Hardened and precision-ground for maximum concentricity, MT shank and tangs
  • Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.
Keyless Drill Chuck 1-13 mm B 16 SKU: 104765
Keyless Drill Chuck 1-13 mm B 16
  • Chucking range 1-13 mm
  • Mount B 16
Keyless Drill Chuck 3-16 mm B 18 SKU: 104770
Keyless Drill Chuck 3-16 mm B 18
  • Chucking range 3-16 mm
  • Mount B 18
Digital Micrometer Calipers 0 - 100 mm SKU: 108365
Digital Micrometer Calipers 0 - 100 mm

4 pieces per set

  • Large LCD display 30 x 10 mm
  • Accuracy acc. to DIN 863
  • Smallest input increment 0.001 mm
  • Tungsten carbide tipped measuring surfaces
  • Automatic display of maximum and minimum values
  • Zeroing at any point
  • Unit selection (metric/inch)
  • Interface for printer connection
Knurl Holder SKU: 108520
Knurl Holder
  • Shank H20, B14, total 140 mm
  • Incl. 2 knurl sets, angled 1 mm
Knurl Set, angles SKU: 108521
Knurl Set, angles
soft top jaws for 3-jaw-chuck 160mm (116500) SKU: 116550
soft top jaws for 3-jaw-chuck 160mm (116500)
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
soft top jaws for 3-jaw-chuck 200mm (116501-166502) SKU: 116551
soft top jaws for 3-jaw-chuck 200mm (116501-166502)
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
4-jaw chuck 200mm D1-4 (steel) SKU: 116601
4-jaw chuck 200mm D1-4 (steel)

Universal-4-jaw lathe chuck with centric clamping action

  • With short taper mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of steel
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts

Additional options available upon request

soft top jaws for 4-jaw-chuck 160mm (116600) SKU: 116650
soft top jaws for 4-jaw-chuck 160mm (116600)
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
soft top jaws for 4-jaw-chuck 200 mm (116601/116602) SKU: 116651
soft top jaws for 4-jaw-chuck 200 mm (116601/116602)
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
4-jaw independent chuck 200mm D1-4 SKU: 116670
4-jaw independent chuck 200mm D1-4

4-jaw face plate lathe chuck with individually advanced clamping jaws

  • With direct mount for Camlock acc. to DIN 55029
  • Can be mounted with using an intermediate flange
  • Chuck body made of cast iron
  • Hardened and ground scroll chuck
  • Ground chuck jaws
  • High clamping force
  • High concentricity

Includes socket spanner, lathe chuck jaws,, Camlock bolts

Additional options available upon request

soft top jaws for 4-jaw- chuck 200mm SKU: 116690
soft top jaws for 4-jaw- chuck 200mm
  • Soft jaw pads are bolted into base jaws
  • Ideal for finishing and precision work
  • Boring of workpiece form directly inside the jaws
  • Already machined parts cannot be damaged during clamping
3-jaw chuck 200mm D1-4 (steel) SKU: 116501
3-jaw chuck 200mm D1-4 (steel)
3-Jaw Lathe Chuck 160 mm D 1-4 (steel) SKU: 146378
3-Jaw Lathe Chuck 160 mm D 1-4 (steel)
Coolant System SKU: 102986
Coolant System
  • Retrofitable, supplied disassembled
  • Motor 400 V, 90 Watt
  • 4.5 l coolant reservoir
  • With flexible grommet and with shut-off valve
  • With 1.5 m coolant hose
Coolant Concentrate 5 Ltr. SKU: 103184
Coolant Concentrate 5 Ltr.
  • Improved chip flow, longer tool service life and better cut profile
  • For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
  • Dilute with water 1:20
  • 1 canister contains 5 Ltr.
Live Centers MT 3 SKU: 106750
Live Centers MT 3
  • Precision needle bearing
  • Hardened and ground point 60°
Live Centers MT 3 SKU: 106785
Live Centers MT 3
  • With 7 replaceable centers
  • Body made of hardened and ground tool steel
  • Precision needle bearing ensures high concentricity, long life and high load capacity
  • Mushroom diameters up to 32.2 mm
Power Worker Metal Cutter SKU: 123040
Power Worker Metal Cutter
  • Universal, quick and mobile use even at limited access locations
  • Safe and clean working environment
  • Reduces risk of injuries caused by sharp metal edges
  • Recyclable due to separable material
  • Stainless steel enclosures and powerful permanent solenoids ensure a long tool life
  • Adjustable rod length
  • Compact dimensions: 368 - 593 mm long, Ø 25 mm
  • Low weight: 600 g
Quick-Set Spindle Bore Stop Size 4 30-38mm SKU: 103016
Quick-Set Spindle Bore Stop Size 4 30-38mm
  • For lathes
  • Key length: 640
  • Quick and easy adjustment to any hollow-spindle point
  • Easy adjustment - just tightening with a safety wrench
Pivoted Mounts LK 3 SKU: 103330
Pivoted Mounts LK 3
  • Damper elements absorb shock and vibration
  • Vibration-free machine operation
  • Set screws allow for easy machine alignment
Accessory-Set MT 3 7-pc. SKU: 104593
Accessory-Set MT 3 7-pc.
  • Incl. keyless drill chuck and drill chuck arbors
  • In wooden case

Content / Set:

  • Reducing sleeve: MT 3 / MT 2
  • Reducing sleeve: MT 3 / MT 1
  • Extension Sleeve: MT 3 / MT 4
  • Tool holder bit: MT 3 / B 18
  • Tool holder bit: MT 3 / B 16
  • Keyless drill chuck: 3-16 mm / B 18
  • Keyless drill chuck: 1-13 mm / B 16

Resources & Downloads

  • Basic 170 Super Brochure.pdf (0.26MB)

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Basic 170 Super - Solid precision bench lathe with large center width
Basic 170 Super
SKU : 300815
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.