Plasma-Jet Compact K 2040
Plasma-Jet Compact K 2040

Plasma-Jet Compact K 2040

SKU : 144036

Working area
Cutting Width 2000 mm
Cutting length 4000 mm
Table height 600 mm
Table load capacity 410 kg/m2
Rapid feed 18000 mm/min
Plasma source Kjellberg
Measures and weights
Weight 3550 kg

Construction

  • The Plasma-Jet Compact Series set themselves apart from the Plasma-Jet TrueCut series by a fully integrated machine frame that is connected to the table via a bottom plate, so the machine can be transported in one piece and requires minimum space
  • If small plasma sources (e.g. Powermax) are used, they also are stored on a shelf inside the frame
  • Table is prepared for dust collection system, being equipped with electro-pneumatically actuated suction flaps for an efficient fume extraction of the segment where the cutting process is momentary in action

Transmission and drives

  • Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
  • Low-wear and low-maintenance helical gears are designed for continuous operation
  • Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm

Cutting head

  • Z axis with ball screw transmission and servo-driven automatic torch height control
  • Quick-coupling for cutter head allows quick head exchanges for reduced tooling time

Control

  • CNC controller from Eckelmann
  • The Eckelmann IBE software is delviered as standard.

Please select the plasma source with the required power.

  • Smart Focus 130 – maximum cutting capacity 40 mm, plunge-cuts 25 mm, recommended range 1-32 mm
  • Smart Focus 170 – maximum cutting capacity 50mm, plunge-cuts 30mm, recommended range 1-35 mm
  • Smart Focus 200 – maximum cutting capacity 60 mm, plunge-cuts 30 mm, recommended range 1-40 mm
  • Smart Focus 300 – maximum cutting capacity 80 mm, plunge-cuts 40 mm, recommended range 1-60 mm
  • Smart Focus 400 – maximum cutting capacity 100 mm, plunge-cuts 50 mm, recommended range for stainless steel 1-70 mm
  • Q 1500 – maximum cutting capacity 60 mm, plunge-cuts 30 mm, recommended range 0,5–40 mm
  • Q 3000 – maximum cutting capacity 80mm, plunge-cuts 50mm, recommended range 0,5 – 60 mm
  • CutFire 100i - maximum cutting capacity 40 mm, piercing 20 mm, recommended range 3-32 mm

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

table prepared for filter system (automatic closure control )
panasonic Servomotors qand drivers
automatic torch height control from Eckelmann
cutting torch with magnetic coupling and crash sensor
Eckelmann CNC-Unit
19” touchscreen by ELO
A-Modul from Beckhoff
laser pointer
Eckelmann IBE Software cncCUT Nest

Eckelmann CNC-Unit

Eckelmann E°EXC 880 E°CUT ECO

  • These application optimized CNC controles have extremely short cycle times, making them ideal for highy dynamic applications
  • The HMI offers a clearly structured design with greater user comfort thanks to its simnplicity, yet providing intuitive access to all functions of the machine
Tube cutting system, 3,000 mm, for Compact series Kjellberg systems
Tube cutting system, 3,000 mm, for Compact series Kjellberg systems SKU: 253870
Tube cutting system, 3,000 mm, for Compact series Kjellberg systems
Smart Focus 130 plasma source SKU: 253877
Smart Focus 130 plasma source

Plasma Cutting

  • The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
  • Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

  • Superior cut quality
  • High cutting speed
  • Tight perpendicularity tolerance
  • User-friendly and low maintenance
  • Less cost per cut

Contour Cut (CC) technology

  • All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
  • Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
  • Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

  • The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
  • These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
  • The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
  • Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Smart Focus 200 Plasma source SKU: 253878
Smart Focus 200 Plasma source

Plasma Cutting

  • The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
  • Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

  • Superior cut quality
  • High cutting speed
  • Tight perpendicularity tolerance
  • User-friendly and low maintenance
  • Less cost per cut

Contour Cut (CC) technology

  • All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
  • Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
  • Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

  • The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
  • These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
  • The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
  • Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Smart Focus 300 Plasma source SKU: 253879
Smart Focus 300 Plasma source

Plasma Cutting

  • The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
  • Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

  • Superior cut quality
  • High cutting speed
  • Tight perpendicularity tolerance
  • User-friendly and low maintenance
  • Less cost per cut

Contour Cut (CC) technology

  • All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
  • Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
  • Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

  • The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
  • These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
  • The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
  • Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Smart Focus 400 Plasma source SKU: 253880
Smart Focus 400 Plasma source

Plasma Cutting

  • The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
  • Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

  • Superior cut quality
  • High cutting speed
  • Tight perpendicularity tolerance
  • User-friendly and low maintenance
  • Less cost per cut

Contour Cut (CC) technology

  • All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
  • Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
  • Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

  • The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
  • These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
  • The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
  • Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Smart Focus 170 plasma source with automatic gas console SKU: 253881
Smart Focus 170 plasma source with automatic gas console

Power supply

  • Flexible CNC-controlled cutting of any electrically conducting materials with thicknesses up to 50 mm
  • Recommended cutting range is from 1 to 35 mm material thickness
  • Maximum piercing depth is 30 mm
  • Suitable for use under the most demanding conditions
  • Easy operation and maintenance
  • Cutting, scribe marking, notching and punching without replacement of wear parts
  • Uses the patented plasma cutting technologies Contour Cut and Contour Cut Speed
  • Secondary gas ignition prolongs consumable life and swirl gas technology is used for hole piercing to preserve nozzles
  • This plasma cutter is an ideal plasma cutting machine for metal construction and mechanical engineering, contract cutting operations, steel structures and construction, systems and container construction and much more.

Technologies

  • Contour Cut: For precise cutting of small contours, narrow lands, small radii and other geometries
  • Contour Cut Speed: Best cutting performance at highest cutting speeds, ideal for highes quality demands
  • Silent Cut: For cutting structural steel with reduced noise level

Plasma torch

  • PerCut 2000 machine torch with quick-changing head and interior contact for initial position sensor
  • Significantly less gas consumption than competitor models due to an effective liquid cooling system that includes the nozzle tip
  • The same consumables are used for cutting and scribe marking
  • Automatic PGV-300 gas console for the automatic control of gases based on material grade and material thickness using integrated databases
Q 1500 Allgas Plasmasource SKU: 253882
Q 1500 Allgas Plasmasource

Plasma Cutting 4.0

The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production

  • Complete new development with more than 60 years of Kjellberg know-how
  • Inverter power source – digitally controlled, fully electronic process flow
  • Modular design – subsequent upgrading of system performance possible
  • Best cutting and marking quality – new Q-Mark and Q-Hole technologies
  • Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
  • Low cost per meter cut – improved cutting speed, longer lifetime of consumables
  • Visualisation of machine, process and consumption information
  • Preventive inspection and maintenance analysis
  • Interactive database, training and service updates

Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.

Q 3000 Allgas Plasmasource SKU: 253883
Q 3000 Allgas Plasmasource

Plasma Cutting 4.0

The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production

  • Complete new development with more than 60 years of Kjellberg know-how
  • Inverter power source – digitally controlled, fully electronic process flow
  • Modular design – subsequent upgrading of system performance possible
  • Best cutting and marking quality – new Q-Mark and Q-Hole technologies
  • Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
  • Low cost per meter cut – improved cutting speed, longer lifetime of consumables
  • Visualisation of machine, process and consumption information
  • Preventive inspection and maintenance analysis
  • Interactive database, training and service updates

Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.

CutFire 100i Plasma source SKU: 253391
CutFire 100i Plasma source
  • The CutFire 100i is a powerful air/plasma system available at low cost, but suitable for wide variety of applications.
  • It is equipped with the latest inverter technology and is one of the few air-cooled systems on the market that offers a duty cycle of 100%. 
  • The cutting inverters CutFire 100i built in or after 2017 are equipped with the new Flash 101 machine torch. With its new consumables the torch uses air as swirl gas. The air rotating around the plasma arc stabilizes the arc to allow up to 20 mm deep piercing cuts.
  • The cooling and protective effect of the swirl gas ensures higher cutting speeds and longer consumable life.
  • The CutFire 100i is ideally suited for cutting thin sheets for ventilation systems and control cabinet construction, metal building applications, as well as many other craft, production and industrial operations.

CutFire 100i Advantages:

  • Piercing up to 20 mm • Precision cutting up to 3 mm • Higher piercing safety • New consumables • High cutting speeds • Electrical contact for finding the initial position (Option) • Swirl gas technology

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Upgrade from Q 1500 to Q 1500 Plus Allgas Plasmasouce SKU: 253866
Upgrade from Q 1500 to Q 1500 Plus Allgas Plasmasouce
Upgrade from Q 3000 to Q 3000 Plus Allgas Plasmasouce SKU: 253867
Upgrade from Q 3000 to Q 3000 Plus Allgas Plasmasouce
Plasma-Jet filter extraction system 4.000 m3/h SKU: 253397
Plasma-Jet filter extraction system 4.000 m3/h
Plasma-Jet filter extraction system 6.000 m3/h SKU: 253398
Plasma-Jet filter extraction system 6.000 m3/h
Additional tube support SKU: 253401
Additional tube support

Additional tube support - must indicate, if round or square tubes

1 meter extension for tube cutting SKU: 253402
1 meter extension for tube cutting
Manual bevel device for cutting head SKU: 253404
Manual bevel device for cutting head
Square adaptor for square tube cutter unit on Plasma-Jet SKU: 253651
Square adaptor for square tube cutter unit on Plasma-Jet
VT Kit PerCut 2000 BSt 200A SKU: 253092
VT Kit PerCut 2000 BSt 200A
VT Kit PerCut 2000 CrNi 200A SKU: 253093
VT Kit PerCut 2000 CrNi 200A
VT Kit PerCut 4000 BSt 300A SKU: 253094
VT Kit PerCut 4000 BSt 300A
VT Kit PerCut 4000 CrNi 300A SKU: 253095
VT Kit PerCut 4000 CrNi 300A
Additional VT 360/400A additional to Part No. 253092-253095 SKU: 253096
Additional VT 360/400A additional to Part No. 253092-253095
Pressure reducer 1-step O2 20 bar SKU: 253104
Pressure reducer 1-step O2 20 bar
Ext. Safety guard 15 bar 1/4" O2 for oxy-fuel cutting SKU: 253097
Ext. Safety guard 15 bar 1/4" O2 for oxy-fuel cutting
Pressure reducer 1-step air 20 bar SKU: 253100
Pressure reducer 1-step air 20 bar
Pressure reducer 1-step Ar/Co2 20 bar SKU: 253101
Pressure reducer 1-step Ar/Co2 20 bar
Pressure reducer 1-step H2 20 bar SKU: 253102
Pressure reducer 1-step H2 20 bar
Pressure reducer 1-step N2 20 bar SKU: 253103
Pressure reducer 1-step N2 20 bar
VT Kit PerCut 2000 BSt 200A SKU: 540681
VT Kit PerCut 2000 BSt 200A
VT Kit PerCut 2000 BSt 200A SKU: 540682
VT Kit PerCut 2000 BSt 200A

Resources & Downloads

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Plasma-Jet Compact K 2040
Plasma-Jet Compact K 2040
SKU : 144036


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.