Select a region
International Americas Sub-Saharan Africa Global Overview
Select a language
English Deutsch Español Русский Français Polski Italiano Čeština Română
Plasma-Jet Compact H 3060 - Compact size, with independent table and cutting technologies from Hypertherm
Optimum track speed even for fine contours and tight radii

Optimum track speed even for fine contours and tight radii

Panasonic servo motors and EtherCAT network type drives

Panasonic servo motors and EtherCAT network type drives

Plasma-Jet Compact H 3060 - Compact size, with independent table and cutting technologies from Hypertherm
Optimum track speed even for fine contours and tight radii
Panasonic servo motors and EtherCAT network type drives

Plasma-Jet Compact H 3060

SKU : 144033

Plasma-Jet Compact 3060 H is a plasma cutting system that has been specially tailored to the needs of our customers. With its compact design, the machine is suitable for small workshops as well as for large industrial companies. Modern technology from Hypertherm and high-quality components from world-renowned manufacturers guarantee high-quality cutting results even in multi-shift operation.

  • Compact design
  • space saving and easy relocation
  • High performance
  • USA Hypertherm technology
  • High productivity
  • designed for multi-shift operation
  • Very low maintenance
Working area
Cutting Width 3000 mm
Cutting length 6000 mm
Table height 600 mm
Table load capacity 410 kg/m2
Rapid feed 18000 mm/min
Plasma source Hypertherm
Measures and weights
Weight 8000 kg

Construction

  • The Plasma-Jet Compact Series set themselves apart from the Plasma-Jet TrueCut series by a fully integrated machine frame that is connected to the table via a bottom plate, so the machine can be transported in one piece and requires minimum space
  • If small plasma sources (e.g. Powermax) are used, they also are stored on a shelf inside the frame
  • Table is prepared for dust collection system, being equipped with electro-pneumatically actuated suction flaps for an efficient fume extraction of the segment where the cutting process is momentary in action

Transmission and drives

  • Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
  • Low-wear and low-maintenance helical gears are designed for continuous operation
  • Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm

Cutting head

  • Z axis with ball screw transmission and servo-driven automatic torch height control
  • Quick-coupling for cutter head allows quick head exchanges for reduced tooling time

Control

  • CNC controller from Hypertherm - Edge CONNECT
  • The ProNest LT Software is delviered as standard.

Please select the plasma source with the required power.

  • Powermax 105 Sync Plasmaquelle ( Schneidleistung unleg.Stahl: Empfohlen: 32 mm 500 mm/min, 38 mm 250 mm/min, Trennschnitt: 50 mm 125 mm/min, Lochstechen: 22 mm)
  • Maxpro 200 ( Schneidleistung unleg.Stahl: Nahezu bartfreie Schneidleistung 20 mm, Lochstechkapazität (Produktion) 32 mm, Trennschnitt* 75 mm)
  • XPR 170 ( Schneidleistung unleg.Stahl: Lochstechen max. 40mm, Trennschnitt max. 60 mm )
  • XPR 300 ( Schneidleistung unleg. Stahl: Lochstechen max. 50mm, Trennschnitte max. 80 mm)

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

table prepared for filter system (automatic closure control )
panasonic Servomotors qand drivers
automatic burner height control with Hypertherm THC sensor
cutting torch with magnetic coupling and crash sensor
Hypertherm Edge Connect CNC-Unit
19” touchscreen by ELO
Ethercat-E
laser pointer
3-jaw-chuck 178 mm

Hypertherm EDGE® Connect

  • EDGE® Connect, Hypertherm’s newest Computer Numeric Control (CNC) platform, delivers unmatched reliability, powerful embedded capabilities, and a high level of customizability
  • With Patented CutPro® Wizard, even new operators can be cutting production parts in less than five minutes
  • On-screen Software Operator’s Console (Soft OpCon) allows easy setup and operation of cutting station and manual motion
  • Integrated communications with plasma and torch height control systems deliver automated and expert control using installed factory or custom cut charts
  • Custom cut charts can be created and controlled in the part program or made available to the CutPro Wizard
  • EDGE Connect runs on the Windows® 10 Enterprise operating system

Phoenix® buit-in software

  • Phoenix® software is the core operational interface and is common across the entire Hypertherm family of CNC systems
  • Contains built-in cut charts for automatically setting process parameters for mild steel, stainless, and aluminum to enable consistently optimized cutting performance
  • The wizards and diagnostic support tools enable easy setup, use and rapid troubleshooting
  • Built-in help and cutting optimization tips for improving table performance and process outcomes at the touch of a button
Maxpro 200 Plasma source
  • The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Maxpro 200 Plasma source SKU: 253406
Maxpro 200 Plasma source
  • The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Powermax 105 Sync plasma source SKU: 253888
Powermax 105 Sync plasma source
XPR 170 Core Plasma source SKU: 253407
XPR 170 Core Plasma source
  • The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
  • It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 170 VWI Plasma source SKU: 253408
XPR 170 VWI Plasma source
  • The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
  • It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 170 Optimix Plasma source SKU: 253409
XPR 170 Optimix Plasma source
  • The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
  • It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.
XPR 300 Core Plasma source SKU: 253410
XPR 300 Core Plasma source
XPR 300 VWI Plasma source SKU: 253411
XPR 300 VWI Plasma source
XPR 300 Optimix Plasma source SKU: 253412
XPR 300 Optimix Plasma source
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems SKU: 253552
Tube cutting system, 3,000 mm, for Compact series Hypertherm systems
Tube cutting system, 6,000 mm, for Compact series Hypertherm systems SKU: 253553
Tube cutting system, 6,000 mm, for Compact series Hypertherm systems
Plasma-Jet H Softwareoption ProNest SKU: 253413
Plasma-Jet H Softwareoption ProNest
Plasma-Jet H Softwareoption Common Line Cutting SKU: 253414
Plasma-Jet H Softwareoption Common Line Cutting
Plasma-Jet H Softwareoption Collision Avoidance SKU: 253415
Plasma-Jet H Softwareoption Collision Avoidance
Plasma-Jet H Softwareoption Chain and Bridge Cutting SKU: 253416
Plasma-Jet H Softwareoption Chain and Bridge Cutting
engraving and marking system for PowerMax and MaxPro SKU: 253815
engraving and marking system for PowerMax and MaxPro
Plasma-Jet filter extraction system 8.000 m3/h SKU: 253399
Plasma-Jet filter extraction system 8.000 m3/h

Highly efficient dust collector and filtration unit, synchronized with the CNC machine, specially designed for extraction and filtration of dust and fume generated during the cutting process.

  • - Paper filters from polyester non-woven with PTFE membrane - 99,9% absorption rate of particles between 0,2 – 2 microns - Auto jet pulse self-cleaning system - Integrated spark separator function
Additional tube support SKU: 253401
Additional tube support

Additional tube support - must indicate, if round or square tubes

1 meter extension for tube cutting SKU: 253402
1 meter extension for tube cutting
Manual bevel device for cutting head SKU: 253404
Manual bevel device for cutting head
Square adaptor for square tube cutter unit on Plasma-Jet SKU: 253651
Square adaptor for square tube cutter unit on Plasma-Jet
SKU: 540822
SKU: 540823
SKU: 540824
SKU: 540825

Resources & Downloads

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Plasma-Jet Compact H 3060 - Compact size, with independent table and cutting technologies from Hypertherm
Plasma-Jet Compact H 3060
SKU : 144033
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.