KSS 32

• 52 parts
• In a convenient, sturdy steel magazine
• 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
• 4 extension nuts, 6 stepped clamps (3 pair), 6 T-slot nuts, 6 hexagon nuts flanged, step blocks (3 pairs)

• Improved chip flow, longer tool service life and better cut profile
• For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
• Dilute with water 1:20
• 1 canister contains 5 Ltr.

• Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
• The sleeves are hardened to ensure a secure hold, and ground inside and outside

• Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
• The sleeves are hardened to ensure a secure hold, and ground inside and outside

• Incl. keyless drill chuck and drill chuck arbors
• In wooden case

Content / Set:

• Reducing sleeve: MT 3 / MT 2
• Reducing sleeve: MT 3 / MT 1
• Extension Sleeve: MT 3 / MT 4
• Tool holder bit: MT 3 / B 18
• Tool holder bit: MT 3 / B 16
• Keyless drill chuck: 3-16 mm / B 18
• Keyless drill chuck: 1-13 mm / B 16

• With inside and outside Morse taper shank
• With tangs
• Fully hardened and ground
• Maximum concentricity

• Hardened and precision-ground for maximum concentricity, MT shank and tangs
• Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.

• Hardened and precision-ground for maximum concentricity, MT shank and tangs
• Precise and cost-effective design for mounting of drill chucks on drill presses, lathes, equipment, etc.

• Chucking range 1-13 mm
• Mount B 16

• Chucking range 3-16 mm
• Mount B 18

• 1 horizontal v-slot and 3 vertical v-slots
• Parallelism of jaws: 0.02 mm
• Guide to base: 0.02 mm

• 20 each (10 pairs) in wooden box
• Black-finished steel

• 38 parts
• 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
• 6 T-slot nuts
• 4 extension nuts
• Hexagon nuts flanged

• High quality steel, black-finished
• Available in pairs only

• High quality steel, black-finished
• Available in pairs only

• Dovetail guideways
• Cast-iron construction

• Integrated quick-return acts promptly upon feed direction change
• Slip coupling torque adjustable to 4 levels
• Including MT 3 and MT 4 shank
• For thread cutter

• Integrated quick-return acts promptly upon feed direction change
• Slip coupling torque adjustable to 4 levels
• Including MT 3 and MT 4 shank
• For thread cutter

• Rigid cast-iron construction
• Use metal, wood or plastic
• Ideal for right angle welding of parts
• Always joins at a 90° angle, either as butt corner joint, miter joint or T-connection
• Copper-plated spindle and spindle nut prevent burnt-on weld beads and splatter

Precise angular clamping of parts during welding or assembly work

• Rigid cast-iron construction
• Use metal, wood or plastic
• Ideal for right angle welding of parts
• Always joins at a 90° angle, either as butt corner joint, miter joint or T-connection
• Copper-plated spindle and spindle nut prevent burnt-on weld beads and splatter

• For insertion in the tailstock of lathes
• MT 3 shank
• Length compensation by simply sliding the bushing on the mounting shank
• Complete with wooden case for drill and 5, 6, 7, 10 mm shanks, dies with 16, 20, 25, 30 mm diameters

Multiple cutter countersink with front face bore. Exchangeable pilot pins allow the use of one countersink for several pilot bores of different sizes.

• MT 2 shank
• Flat countersink: Ø14.5-24.5 mm
• Sizes: Ø 14.5 / 16.5 / 18.5 / 20.5 / 22.5 / 24.5 mm
• Pilot pin: Ø7 - 15 mm
• Sizes: Ø7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 13 / 14 / 15 mm

• Solid vise, ideal for drill presses
• Deep hole bores for flexible clamping
• Low height for cost-effective use of machine

• Saves time when clamping parts for grinding, milling, drilling etc. ...
• No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
• Multiple flat parts, or individual thin parts can be clamped
• Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
• 8 pair per set - 2 mm incrementing

• Saves time when clamping parts for grinding, milling, drilling etc. ...
• No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
• Multiple flat parts, or individual thin parts can be clamped
• Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
• 8 pair per set - 2 mm incrementing

• Mount with connection thread for reaming heads
• With draw-in bolt thread for use on milling machines
• Tapers are hardened and ground
• The reaming head set is provided without mount
• Shank with draw-in thread MT 3

• For easy inside diameter turning on drill presses, lathes and milling machines
• Micrometer screw for precise inside turning diameter adjustment
• High quality steel hardened and precision-ground
• Feed: 0.01 mm / division line
• 2 vertical tool mounts, 1 horizontal tool mount

• For easy inside diameter turning on drill presses, lathes and milling machines
• Micrometer screw for precise inside turning diameter adjustment
• High quality steel hardened and precision-ground
• Feed: 0.01 mm / division line
• 2 vertical tool mounts, 1 horizontal tool mount

• 1 horizontal v-slot and 3 vertical v-slots
• Parallelism of jaws: 0.02 mm
• Guide to base: 0.02 mm

• Universal, quick and mobile use even at limited access locations
• Safe and clean working environment
• Reduces risk of injuries caused by sharp metal edges
• Recyclable due to separable material
• Stainless steel enclosures and powerful permanent solenoids ensure a long tool life
• Adjustable rod length
• Compact dimensions: 368 - 593 mm long, Ø 25 mm
• Low weight: 600 g