TSB 25

• Improved chip flow, longer tool service life and better cut profile
• For sawing, drilling, milling, turning of steel, cast-iron, stainless steel, non-ferrous and light metals
• Dilute with water 1:20
• 1 canister contains 5 Ltr.

• Chucking range 1-13 mm
• Mount B 16

• Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
• The sleeves are hardened to ensure a secure hold, and ground inside and outside

• Chucking range 3-16 mm
• Mount B 18

• Reducing sleeves are used for tool mounting with Morse taper shanks on lathes, drill presses, and milling machines
• The sleeves are hardened to ensure a secure hold, and ground inside and outside

• High quality cast iron
• Hardened and ground replaceable steel jaws
• Covered spindle
• Forged bronze spindle nut
• Including hand crank, swivel-base and scale

• 52 parts
• In a convenient, sturdy steel magazine
• 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
• 4 extension nuts, 6 stepped clamps (3 pair), 6 T-slot nuts, 6 hexagon nuts flanged, step blocks (3 pairs)

• With inside and outside Morse taper shank
• With tangs
• Fully hardened and ground
• Maximum concentricity

• Dovetail guideways
• Cast-iron construction

• Integrated quick-return acts promptly upon feed direction change
• Slip coupling torque adjustable to 4 levels
• Including MT 2 and MT 3 shank
• For thread cutter

• 1 horizontal v-slot and 3 vertical v-slots
• Parallelism of jaws: 0.02 mm
• Guide to base: 0.02 mm

• For easy inside diameter turning on drill presses, lathes and milling machines
• Micrometer screw for precise inside turning diameter adjustment
• High quality steel hardened and precision-ground
• Feed: 0.01 mm / division line
• 2 vertical tool mounts, 1 horizontal tool mount

• Pull-down system: absolutely secure workpiece hold even during cutting of heavy parts
• Hardened and precision-ground steel jaws
• Dial turns 360° and has 1° scale division
• Parallelism ± 0,03 mm / 100 mm
• Precise, hardened jaw guides
• Made of high-quality cast-iron

• For easy inside diameter turning on drill presses, lathes and milling machines
• Micrometer screw for precise inside turning diameter adjustment
• High quality steel hardened and precision-ground
• Feed: 0.01 mm / division line
• 2 vertical tool mounts, 1 horizontal tool mount

• Pull-down system: absolutely secure workpiece hold even during cutting of heavy parts
• Hardened and precision-ground steel jaws
• Dial turns 360° and has 1° scale division
• Parallelism ± 0,03 mm / 100 mm
• Precise, hardened jaw guides
• Made of high-quality cast-iron

• Mount with connection thread for reaming heads
• With draw-in bolt thread for use on milling machines
• Tapers are hardened and ground
• The reaming head set is provided without mount
• Shank with draw-in thread MT 3

• High quality cast iron
• Hardened and ground replaceable steel jaws
• Covered spindle
• Forged bronze spindle nut
• Including hand crank, swivel-base and scale

• 20 each (10 pairs) in wooden box
• Black-finished steel

• 38 parts
• 24 stud bolts, 4 each in the lengths 75, 100, 125, 150, 175, 200 mm
• 6 T-slot nuts
• 4 extension nuts
• Hexagon nuts flanged

• High quality steel, black-finished
• Available in pairs only

• High quality steel, black-finished
• Available in pairs only

• Dovetail guideways
• Cast-iron construction

• Cast-iron construction
• T-slot, coolant groove
• Dovetail guides, adjustable

• Integrated quick-return acts promptly upon feed direction change
• Slip coupling torque adjustable to 4 levels
• Including MT 3 and MT 4 shank
• For thread cutter

• Integrated quick-return acts promptly upon feed direction change
• Slip coupling torque adjustable to 4 levels
• Including MT 3 and MT 4 shank
• For thread cutter

• Rigid cast-iron construction
• Use metal, wood or plastic
• Ideal for right angle welding of parts
• Always joins at a 90° angle, either as butt corner joint, miter joint or T-connection
• Copper-plated spindle and spindle nut prevent burnt-on weld beads and splatter

Precise angular clamping of parts during welding or assembly work

• Rigid cast-iron construction
• Use metal, wood or plastic
• Ideal for right angle welding of parts
• Always joins at a 90° angle, either as butt corner joint, miter joint or T-connection
• Copper-plated spindle and spindle nut prevent burnt-on weld beads and splatter

• For insertion in the tailstock of lathes
• MT 3 shank
• Length compensation by simply sliding the bushing on the mounting shank
• Complete with wooden case for drill and 5, 6, 7, 10 mm shanks, dies with 16, 20, 25, 30 mm diameters

Multiple cutter countersink with front face bore. Exchangeable pilot pins allow the use of one countersink for several pilot bores of different sizes.

• MT 2 shank
• Flat countersink: Ø14.5-24.5 mm
• Sizes: Ø 14.5 / 16.5 / 18.5 / 20.5 / 22.5 / 24.5 mm
• Pilot pin: Ø7 - 15 mm
• Sizes: Ø7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 13 / 14 / 15 mm

• Swivels on 2 axes
• High precision vise for accurate and exact precisionsmechanics work (also suitable for watch making, jewellery industries)
• Swivels from horizontal (180°) to vertical (90°)
• Turns 360° on a dial
• Jaws are made of hardened and precision-ground tool steel

• Swivels on 2 axes
• High precision vise for accurate and exact precisionsmechanics work (also suitable for watch making, jewellery industries)
• Swivels from horizontal (180°) to vertical (90°)
• Turns 360° on a dial
• Jaws are made of hardened and precision-ground tool steel

• Swivels on 2 axes
• High precision vise for accurate and exact precisionsmechanics work (also suitable for watch making, jewellery industries)
• Swivels from horizontal (180°) to vertical (90°)
• Turns 360° on a dial
• Jaws are made of hardened and precision-ground tool steel

• Solid vise, ideal for drill presses
• Deep hole bores for flexible clamping
• Low height for cost-effective use of machine

• Solid vise, ideal for drill presses
• Deep hole bores for flexible clamping
• Low height for cost-effective use of machine

• High precision, robust structure, hardened and ground v-slots high holding capacity
• Usable on 4 different sides
• Face parallelism 0.005 to 100 mm
• Solid steel structure, hardness 58-62 HRC

• High precision, robust structure, hardened and ground v-slots high holding capacity
• Usable on 4 different sides
• Face parallelism 0.005 to 100 mm
• Solid steel structure, hardness 58-62 HRC

• Saves time when clamping parts for grinding, milling, drilling etc. ...
• No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
• Multiple flat parts, or individual thin parts can be clamped
• Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
• 8 pair per set - 2 mm incrementing

• Saves time when clamping parts for grinding, milling, drilling etc. ...
• No chips are left on the supporting surface to ensure unaffected parallelism of the clamped workpiece
• Multiple flat parts, or individual thin parts can be clamped
• Hardened and tempered spring steel, 110 mm long parallelism ± 0.005 mm, precision-ground
• 8 pair per set - 2 mm incrementing

• Screw 50 - 63 mm with 6 extension elements (13, 25, 50, 100, 150, 200 mm)
• Control gauge 50 mm
• Reading accuracy 0.01 mm
• Steel, satin chrome-plated finish
• In wooden case

• 1 scale gradation direct read-out at the table
• Cast-iron frame, ground table surface and guideways